Bump firmware version to 8.1.6 - Update package.json, changelog, versions.h

Merge dev into master

CHANGELOG.md

@@ -5,6 +5,44 @@ All notable changes to this project will be documented in this file.
 The format is loosely based on [Keep a Changelog](http://keepachangelog.com/en/1.0.0/)
 and this project adheres to the [UHK Versioning](VERSIONING.md) conventions.
 
+## [8.1.6] - 2018-04-10
+
+Device Protocol: 4.**3.0** | Module Protocol: 4.0.0 | User Config: 4.0.0 | Hardware Config: 1.0.0
+
+- Change the scheduling of USB reports which changes mouse pointer speeds.
+- Disable LEDs while the host sleeps.
+- Make any key wake up the host while it sleeps.
+- Add UsbCommand_SwitchKeymap(). `DEVICEPROTOCOL:MINOR`
+- Make GCC optimize the release builds for execution speed (-O3).
+
+## [8.1.5] - 2018-04-04
+
+Device Protocol: 4.2.0 | Module Protocol: 4.0.0 | User Config: 4.0.0 | Hardware Config: 1.0.0
+
+- Set key debounce timeout from 30ms to 60ms. This should eliminate key chattering.
+- Use the correct scancode for the menu key of the factory keymap.
+
+## [8.1.4] - 2018-03-05
+
+Device Protocol: 4.2.0 | Module Protocol: 4.0.0 | User Config: 4.0.0 | Hardware Config: 1.0.0
+
+- Set key debounce timeout from 20ms to 30ms. This should eliminate key chattering.
+- Set double tap lock layer timeout from 250ms to 150ms. This should minimize the chance of locking layers accidentally by double tapping their keys.
+
+## [8.1.3] - 2018-02-18
+
+Device Protocol: 4.2.0 | Module Protocol: 4.0.0 | User Config: 4.0.0 | Hardware Config: 1.0.0
+
+- Fix system keyboard descriptor, so it is byte-aligned.
+- Set key debounce timeout from 15ms to 20ms. This should at least reduce and hopefully eliminate key chattering.
+
+## [8.1.2] - 2018-02-13
+
+Device Protocol: 4.2.0 | Module Protocol: 4.0.0 | User Config: 4.0.0 | Hardware Config: 1.0.0
+
+- Detect Caps Lock USB state and light up the Caps Lock icon of the LED display accordingly.
+- Set key debounce timeout from 10ms to 15ms. This should at least reduce and hopefully eliminate key chattering.
+
 ## [8.1.1] - 2018-02-11
 
 Device Protocol: 4.2.0 | Module Protocol: 4.0.0 | User Config: 4.0.0 | Hardware Config: 1.0.0
@@ -75,7 +113,7 @@ Device Protocol: 2.0.0 | Module Protocol: 3.0.0 | User Config: **3.0.0** | Hardw
 
 - Implement mouse movement and scrolling deceleration and acceleration.
 - Toggle layers upon double tapping their keys. Make the double tap timeout configurable.
-- Make the parser read additional user configuration properties: USERCONFIGMajorVersion, USERCONFIGMinorVersion, USERCONFIGPatchVersion, doubleTapSwitchLayerTimeout, iconsAndLayerTextsBrightness, alphanumericSegmentsBrightness, keyBacklightBrightness, mouseMoveInitialSpeed, mouseMoveAcceleration, mouseMoveDeceleratedSpeed, mouseMoveBaseSpeed, mouseMoveAcceleratedSpeed, mouseScrollInitialSpeed, mouseScrollAcceleration, mouseScrollDeceleratedSpeed, mouseScrollBaseSpeed, mouseScrollAcceleratedSpeed. `USERCONFIG:MAJOR`
+- Make the parser read additional user configuration properties: userConfigMajorVersion, userConfigMinorVersion, userConfigPatchVersion, doubleTapSwitchLayerTimeout, iconsAndLayerTextsBrightness, alphanumericSegmentsBrightness, keyBacklightBrightness, mouseMoveInitialSpeed, mouseMoveAcceleration, mouseMoveDeceleratedSpeed, mouseMoveBaseSpeed, mouseMoveAcceleratedSpeed, mouseScrollInitialSpeed, mouseScrollAcceleration, mouseScrollDeceleratedSpeed, mouseScrollBaseSpeed, mouseScrollAcceleratedSpeed. `USERCONFIG:MAJOR`
 
 ## [3.0.0] - 2017-11-15
 

left/build/.cproject

@@ -17,7 +17,7 @@
 				<configuration artifactExtension="elf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.debug,org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe" cleanCommand="${cross_rm} -rf" description="" id="ilg.gnuarmeclipse.managedbuild.cross.config.elf.debug.1792027861" name="uhk60-left_debug" parent="ilg.gnuarmeclipse.managedbuild.cross.config.elf.debug">
 					<folderInfo id="ilg.gnuarmeclipse.managedbuild.cross.config.elf.debug.1792027861." name="/" resourcePath="">
 						<toolChain id="ilg.gnuarmeclipse.managedbuild.cross.toolchain.elf.debug.439601044" name="Cross ARM GCC" superClass="ilg.gnuarmeclipse.managedbuild.cross.toolchain.elf.debug">
-							<option id="ilg.gnuarmeclipse.managedbuild.cross.option.optimization.level.780228407" name="Optimization Level" superClass="ilg.gnuarmeclipse.managedbuild.cross.option.optimization.level" value="ilg.gnuarmeclipse.managedbuild.cross.option.optimization.level.none" valueType="enumerated"/>
+							<option id="ilg.gnuarmeclipse.managedbuild.cross.option.optimization.level.780228407" name="Optimization Level" superClass="ilg.gnuarmeclipse.managedbuild.cross.option.optimization.level" value="ilg.gnuarmeclipse.managedbuild.cross.option.optimization.level.most" valueType="enumerated"/>
 							<option id="ilg.gnuarmeclipse.managedbuild.cross.option.optimization.messagelength.1547417078" name="Message length (-fmessage-length=0)" superClass="ilg.gnuarmeclipse.managedbuild.cross.option.optimization.messagelength" value="true" valueType="boolean"/>
 							<option id="ilg.gnuarmeclipse.managedbuild.cross.option.optimization.signedchar.765602671" name="'char' is signed (-fsigned-char)" superClass="ilg.gnuarmeclipse.managedbuild.cross.option.optimization.signedchar" value="true" valueType="boolean"/>
 							<option id="ilg.gnuarmeclipse.managedbuild.cross.option.optimization.functionsections.910567930" name="Function sections (-ffunction-sections)" superClass="ilg.gnuarmeclipse.managedbuild.cross.option.optimization.functionsections" value="true" valueType="boolean"/>

left/build/.gitignore

@@ -1,3 +1,4 @@
 /.settings/
 /uhk60-left_debug/
 /uhk60-left_release/
+/uhk60-left_release/

right/build/.cproject

@@ -17,7 +17,7 @@
 				<configuration artifactExtension="elf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.release,org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe" cleanCommand="${cross_rm} -rf" description="" id="ilg.gnuarmeclipse.managedbuild.cross.config.elf.release.1939339834.1692217331" name="uhk60-right_release" parent="ilg.gnuarmeclipse.managedbuild.cross.config.elf.release">
 					<folderInfo id="ilg.gnuarmeclipse.managedbuild.cross.config.elf.release.1939339834.1692217331." name="/" resourcePath="">
 						<toolChain id="ilg.gnuarmeclipse.managedbuild.cross.toolchain.elf.release.453692058" name="Cross ARM GCC" superClass="ilg.gnuarmeclipse.managedbuild.cross.toolchain.elf.release">
-							<option id="ilg.gnuarmeclipse.managedbuild.cross.option.optimization.level.8609064" name="Optimization Level" superClass="ilg.gnuarmeclipse.managedbuild.cross.option.optimization.level" value="ilg.gnuarmeclipse.managedbuild.cross.option.optimization.level.size" valueType="enumerated"/>
+							<option id="ilg.gnuarmeclipse.managedbuild.cross.option.optimization.level.8609064" name="Optimization Level" superClass="ilg.gnuarmeclipse.managedbuild.cross.option.optimization.level" value="ilg.gnuarmeclipse.managedbuild.cross.option.optimization.level.most" valueType="enumerated"/>
 							<option id="ilg.gnuarmeclipse.managedbuild.cross.option.optimization.messagelength.704315278" name="Message length (-fmessage-length=0)" superClass="ilg.gnuarmeclipse.managedbuild.cross.option.optimization.messagelength" value="true" valueType="boolean"/>
 							<option id="ilg.gnuarmeclipse.managedbuild.cross.option.optimization.signedchar.108613118" name="'char' is signed (-fsigned-char)" superClass="ilg.gnuarmeclipse.managedbuild.cross.option.optimization.signedchar" value="true" valueType="boolean"/>
 							<option id="ilg.gnuarmeclipse.managedbuild.cross.option.optimization.functionsections.916504304" name="Function sections (-ffunction-sections)" superClass="ilg.gnuarmeclipse.managedbuild.cross.option.optimization.functionsections" value="true" valueType="boolean"/>
@@ -136,9 +136,6 @@
 							</tool>
 						</toolChain>
 					</folderInfo>
-					<fileInfo id="ilg.gnuarmeclipse.managedbuild.cross.config.elf.release.1939339834.1692217331.621318926" name="wormhole.c" rcbsApplicability="disable" resourcePath="bootloader-shared/wormhole.c" toolsToInvoke="ilg.gnuarmeclipse.managedbuild.cross.tool.c.compiler.813655335.948885614">
-						<tool id="ilg.gnuarmeclipse.managedbuild.cross.tool.c.compiler.813655335.948885614" name="Cross ARM C Compiler" superClass="ilg.gnuarmeclipse.managedbuild.cross.tool.c.compiler.813655335"/>
-					</fileInfo>
 				</configuration>
 			</storageModule>
 			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>

right/build/MK22FN512xxx12_flash.ld

@@ -196,21 +196,27 @@ SECTIONS
   text_end = ORIGIN(m_text) + LENGTH(m_text);
   ASSERT(__DATA_END <= text_end, "region m_text overflowed with text and data")
 
-  USB_RAM_GAP = DEFINED(__usb_ram_size__) ? __usb_ram_size__ : 0x800;
   /* Uninitialized data section */
-  .bss :
+  .bss : ALIGN(4)
   {
     /* This is used by the startup in order to initialize the .bss section */
-    . = ALIGN(4);
     __START_BSS = .;
     __bss_start__ = .;
     *(.bss)
     *(.bss*)
-    . = ALIGN(512);
-    USB_RAM_START = .;
-    . += USB_RAM_GAP;
     *(COMMON)
     . = ALIGN(4);
+  } > m_data
+  
+  .m_usb_bdt (NOLOAD) :
+  {
+    . = ALIGN(512); 
+    *(m_usb_bdt)
+  } > m_data
+
+  .m_usb_global (NOLOAD) :
+  {
+    *(m_usb_global)
     __bss_end__ = .;
     __END_BSS = .;
   } > m_data
@@ -239,17 +245,6 @@ SECTIONS
     . += STACK_SIZE;
   } > m_data_2
 
-  m_usb_bdt USB_RAM_START (NOLOAD) :
-  {
-    *(m_usb_bdt)
-    USB_RAM_BDT_END = .;
-  }
-
-  m_usb_global USB_RAM_BDT_END (NOLOAD) :
-  {
-    *(m_usb_global)
-  }
-
   /* Initializes stack on the end of block */
   __StackTop   = ORIGIN(m_data_2) + LENGTH(m_data_2);
   __StackLimit = __StackTop - STACK_SIZE;

right/src/config_parser/parse_config.c

@@ -56,6 +56,7 @@ parser_error_t ParseConfig(config_buffer_t *buffer)
     (void)dataModelMinorVersion;
     (void)dataModelPatchVersion;
     (void)deviceName;
+    (void)doubleTapSwitchLayerTimeout;
 
     // LED brightness
 
@@ -136,7 +137,7 @@ parser_error_t ParseConfig(config_buffer_t *buffer)
     // If parsing succeeded then apply the parsed values.
 
     if (!ParserRunDry) {
-        DoubleTapSwitchLayerTimeout = doubleTapSwitchLayerTimeout;
+//        DoubleTapSwitchLayerTimeout = doubleTapSwitchLayerTimeout;
 
         // Update LED brightnesses and reinitialize LED drivers
 

right/src/eeprom.c

@@ -6,10 +6,10 @@
 #include "config_parser/config_globals.h"
 #include "buffer.h"
 
-bool IsEepromBusy;
+volatile bool IsEepromBusy;
 static eeprom_operation_t CurrentEepromOperation;
 static config_buffer_id_t CurrentConfigBufferId;
-status_t LastEepromTransferStatus;
+static status_t LastEepromTransferStatus;
 void (*SuccessCallback)(void);
 
 static i2c_master_handle_t i2cHandle;

right/src/eeprom.h

@@ -24,8 +24,7 @@
 
 // Variables:
 
-    extern bool IsEepromBusy;
-    extern status_t EepromTransferStatus;
+    extern volatile bool IsEepromBusy;
 
 // Functions:
 

right/src/init_peripherals.c

@@ -18,10 +18,10 @@
 #include "bootloader/wormhole.h"
 
 bool IsBusPalOn;
-uint32_t I2cMainBusRequestedBaudRateBps = I2C_MAIN_BUS_NORMAL_BAUD_RATE;
-uint32_t I2cMainBusActualBaudRateBps;
+volatile uint32_t I2cMainBusRequestedBaudRateBps = I2C_MAIN_BUS_NORMAL_BAUD_RATE;
+volatile uint32_t I2cMainBusActualBaudRateBps;
 
-void initBusPalState(void) {
+static void initBusPalState(void) {
     IsBusPalOn = Wormhole.magicNumber == WORMHOLE_MAGIC_NUMBER && Wormhole.enumerationMode == EnumerationMode_BusPal;
     if (IsBusPalOn) {
         Wormhole.magicNumber = 0;
@@ -29,7 +29,7 @@ void initBusPalState(void) {
     }
 }
 
-void initInterruptPriorities(void)
+static void initInterruptPriorities(void)
 {
     NVIC_SetPriority(PIT_I2C_WATCHDOG_IRQ_ID,  1);
     NVIC_SetPriority(PIT_TIMER_IRQ_ID,         2);
@@ -40,12 +40,12 @@ void initInterruptPriorities(void)
     NVIC_SetPriority(USB_IRQ_ID,               3);
 }
 
-void delay(void)
+static void delay(void)
 {
     for (volatile uint32_t i=0; i<62; i++);
 }
 
-void recoverI2c(void)
+static void recoverI2c(void)
 {
     PORT_SetPinMux(I2C_MAIN_BUS_SDA_PORT, I2C_MAIN_BUS_SDA_PIN, kPORT_MuxAsGpio);
     PORT_SetPinMux(I2C_MAIN_BUS_SCL_PORT, I2C_MAIN_BUS_SCL_PIN, kPORT_MuxAsGpio);
@@ -74,7 +74,7 @@ void recoverI2c(void)
     delay();
 }
 
-void initI2cMainBus(void)
+static void initI2cMainBus(void)
 {
     CLOCK_EnableClock(I2C_MAIN_BUS_SDA_CLOCK);
     CLOCK_EnableClock(I2C_MAIN_BUS_SCL_CLOCK);
@@ -105,7 +105,7 @@ void ReinitI2cMainBus(void)
     InitSlaveScheduler();
 }
 
-void initI2cEepromBus(void)
+static void initI2cEepromBus(void)
 {
     port_pin_config_t pinConfig = {
        .pullSelect = kPORT_PullUp,
@@ -126,7 +126,7 @@ void initI2cEepromBus(void)
    I2C_MasterInit(I2C_EEPROM_BUS_BASEADDR, &masterConfig, sourceClock);
 }
 
-void initI2c(void)
+static void initI2c(void)
 {
     initI2cMainBus();
     initI2cEepromBus();

right/src/init_peripherals.h

@@ -8,8 +8,8 @@
 // Variables:
 
     extern bool IsBusPalOn;
-    extern uint32_t I2cMainBusRequestedBaudRateBps;
-    extern uint32_t I2cMainBusActualBaudRateBps;
+    extern volatile uint32_t I2cMainBusRequestedBaudRateBps;
+    extern volatile uint32_t I2cMainBusActualBaudRateBps;
 
 // Functions:
 

right/src/key_debouncer.h

@@ -9,7 +9,7 @@
 // Macros:
 
     #define KEY_DEBOUNCER_INTERVAL_MSEC 1
-    #define KEY_DEBOUNCER_TIMEOUT_MSEC 10
+    #define KEY_DEBOUNCER_TIMEOUT_MSEC 60
 
 // Functions:
 

right/src/keymap.c

@@ -6,12 +6,19 @@
 #include "config_parser/config_globals.h"
 #include "macros.h"
 
-keymap_reference_t AllKeymaps[MAX_KEYMAP_NUM] = { { "FTY", 0, 3 } };
+keymap_reference_t AllKeymaps[MAX_KEYMAP_NUM] = {
+    {
+        .abbreviation = "FTY",
+        .offset = 0,
+        .abbreviationLen = 3
+    }
+};
+
 uint8_t AllKeymapsCount;
 uint8_t DefaultKeymapIndex;
 uint8_t CurrentKeymapIndex = 0;
 
-void SwitchKeymap(uint8_t index)
+void SwitchKeymapById(uint8_t index)
 {
     CurrentKeymapIndex = index;
     ValidatedUserConfigBuffer.offset = AllKeymaps[index].offset;
@@ -19,6 +26,18 @@ void SwitchKeymap(uint8_t index)
     LedDisplay_SetCurrentKeymapText();
 }
 
+bool SwitchKeymapByAbbreviation(uint8_t length, char *abbrev)
+{
+    for (uint8_t i=0; i<AllKeymapsCount; i++) {
+        keymap_reference_t *keymap = AllKeymaps + i;
+        if (keymap->abbreviationLen == length && memcmp(keymap->abbreviation, abbrev, length) == 0) {
+            SwitchKeymapById(i);
+            return true;
+        }
+    }
+    return false;
+}
+
 // The factory keymap is initialized before it gets overwritten by the default keymap of the EEPROM.
 key_action_t CurrentKeymap[LAYER_COUNT][SLOT_COUNT][MAX_KEY_COUNT_PER_MODULE] = {
     // Base layer
@@ -157,7 +176,7 @@ key_action_t CurrentKeymap[LAYER_COUNT][SLOT_COUNT][MAX_KEY_COUNT_PER_MODULE] =
             { .type = KeyActionType_None },
             { .type = KeyActionType_None },
             { .type = KeyActionType_None },
-            { .type = HID_KEYBOARD_SC_MENU },
+            { .type = KeyActionType_Keystroke, .keystroke = { .scancode = HID_KEYBOARD_SC_APPLICATION }},
             { .type = KeyActionType_Keystroke, .keystroke = { .scancode = HID_KEYBOARD_SC_RIGHT_SHIFT }},
             { .type = KeyActionType_None },
 

right/src/keymap.h

@@ -29,6 +29,7 @@
 
 // Functions:
 
-    void SwitchKeymap(uint8_t index);
+    void SwitchKeymapById(uint8_t index);
+    bool SwitchKeymapByAbbreviation(uint8_t length, char *abbrev);
 
 #endif

right/src/led_display.c

@@ -90,7 +90,7 @@ void LedDisplay_SetCurrentKeymapText(void)
     LedDisplay_SetText(currentKeymap->abbreviationLen, currentKeymap->abbreviation);
 }
 
-void LedDisplay_SetLayer(uint8_t layerId)
+void LedDisplay_SetLayer(layer_id_t layerId)
 {
     for (uint8_t i = 13; i <= 45; i += 16) {
         LedDriverValues[LedDriverId_Left][i] = 0;
@@ -101,6 +101,11 @@ void LedDisplay_SetLayer(uint8_t layerId)
     }
 }
 
+bool LedDisplay_GetIcon(led_display_icon_t icon)
+{
+    return LedDriverValues[LedDriverId_Left][8 + icon];
+}
+
 void LedDisplay_SetIcon(led_display_icon_t icon, bool isEnabled)
 {
     LedDriverValues[LedDriverId_Left][8 + icon] = isEnabled ? IconsAndLayerTextsBrightness : 0;

right/src/led_display.h

@@ -5,6 +5,7 @@
 
     #include <stdint.h>
     #include <stdbool.h>
+    #include "layer.h"
 
 // Typedefs:
 
@@ -23,7 +24,9 @@
 
     void LedDisplay_SetText(uint8_t length, const char* text);
     void LedDisplay_SetCurrentKeymapText(void);
-    void LedDisplay_SetLayer(uint8_t layerId);
+    void LedDisplay_SetLayer(layer_id_t layerId);
     void LedDisplay_SetIcon(led_display_icon_t icon, bool isEnabled);
 
+    bool LedDisplay_GetIcon(led_display_icon_t icon);
+
 #endif

right/src/main.c

@@ -11,15 +11,15 @@
 #include "peripherals/reset_button.h"
 #include "usb_report_updater.h"
 
-bool IsEepromInitialized = false;
-bool IsConfigInitialized = false;
+static bool IsEepromInitialized = false;
+static bool IsConfigInitialized = false;
 
-void userConfigurationReadFinished(void)
+static void userConfigurationReadFinished(void)
 {
     IsEepromInitialized = true;
 }
 
-void hardwareConfigurationReadFinished(void)
+static void hardwareConfigurationReadFinished(void)
 {
     EEPROM_LaunchTransfer(EepromOperation_Read, ConfigBufferId_StagingUserConfig, userConfigurationReadFinished);
 }

right/src/peripherals/adc.c

@@ -2,7 +2,7 @@
 #include "fsl_port.h"
 #include "peripherals/adc.h"
 
-adc16_channel_config_t adc16ChannelConfigStruct;
+static adc16_channel_config_t adc16ChannelConfigStruct;
 
 void ADC_Init(void)
 {

right/src/timer.c

@@ -1,7 +1,7 @@
 #include "fsl_pit.h"
 #include "timer.h"
 
-uint32_t CurrentTime;
+static volatile uint32_t CurrentTime;
 
 void PIT_TIMER_HANDLER(void)
 {
@@ -24,6 +24,10 @@ void Timer_Init(void)
     PIT_StartTimer(PIT, PIT_TIMER_CHANNEL);
 }
 
+uint32_t Timer_GetCurrentTime() {
+    return CurrentTime;
+}
+
 void Timer_SetCurrentTime(uint32_t *time)
 {
     *time = CurrentTime;

right/src/timer.h

@@ -9,13 +9,10 @@
 
     #define TIMER_INTERVAL_MSEC 1
 
-// Variables:
-
-    extern uint32_t CurrentTime;
-
 // Functions:
 
     void Timer_Init(void);
+    uint32_t Timer_GetCurrentTime();
     void Timer_SetCurrentTime(uint32_t *time);
     uint32_t Timer_GetElapsedTime(uint32_t *time);
     uint32_t Timer_GetElapsedTimeAndSetCurrent(uint32_t *time);

right/src/usb_commands/usb_command_apply_config.c

@@ -45,15 +45,9 @@ void UsbCommand_ApplyConfig(void)
     }
 
     // Switch to the keymap of the updated configuration of the same name or the default keymap.
-
-    for (uint8_t keymapId = 0; keymapId < AllKeymapsCount; keymapId++) {
-        if (AllKeymaps[keymapId].abbreviationLen == oldKeymapAbbreviationLen &&
-            !memcmp(oldKeymapAbbreviation, AllKeymaps[keymapId].abbreviation, oldKeymapAbbreviationLen))
-        {
-            SwitchKeymap(keymapId);
-            return;
-        }
+    if (SwitchKeymapByAbbreviation(oldKeymapAbbreviationLen, oldKeymapAbbreviation)) {
+        return;
     }
 
-    SwitchKeymap(DefaultKeymapIndex);
+    SwitchKeymapById(DefaultKeymapIndex);
 }

right/src/usb_commands/usb_command_get_debug_buffer.c

@@ -22,7 +22,7 @@ void UsbCommand_GetDebugBuffer(void)
     SetDebugBufferUint32(13, I2cWatchdog_RecoveryCounter);
     SetDebugBufferUint32(17, KeyScannerCounter);
     SetDebugBufferUint32(21, UsbReportUpdateCounter);
-    SetDebugBufferUint32(25, CurrentTime);
+    SetDebugBufferUint32(25, Timer_GetCurrentTime());
     SetDebugBufferUint32(29, UsbGenericHidActionCounter);
     SetDebugBufferUint32(33, UsbBasicKeyboardActionCounter);
     SetDebugBufferUint32(37, UsbMediaKeyboardActionCounter);

right/src/usb_commands/usb_command_get_device_property.c

@@ -69,7 +69,7 @@ void UsbCommand_GetDeviceProperty(void)
             SetUsbTxBufferUint32(6, I2cMainBusActualBaudRateBps);
             break;
         case DevicePropertyId_Uptime:
-            SetUsbTxBufferUint32(1, CurrentTime);
+            SetUsbTxBufferUint32(1, Timer_GetCurrentTime());
             break;
         default:
             SetUsbTxBufferUint8(0, UsbStatusCode_GetDeviceProperty_InvalidProperty);

right/src/usb_commands/usb_command_switch_keymap.c

@@ -0,0 +1,17 @@
+#include "usb_protocol_handler.h"
+#include "usb_commands/usb_command_switch_keymap.h"
+#include "keymap.h"
+
+void UsbCommand_SwitchKeymap(void)
+{
+    uint32_t keymapLength = GetUsbRxBufferUint8(1);
+    char *keymapAbbrev = (char*)GenericHidInBuffer + 2;
+
+    if (keymapLength > KEYMAP_ABBREVIATION_LENGTH) {
+        SetUsbTxBufferUint8(0, UsbStatusCode_SwitchKeymap_InvalidAbbreviationLength);
+    }
+
+    if (!SwitchKeymapByAbbreviation(keymapLength, keymapAbbrev)) {
+        SetUsbTxBufferUint8(0, UsbStatusCode_SwitchKeymap_InvalidAbbreviation);
+    }
+}

right/src/usb_commands/usb_command_switch_keymap.h

@@ -0,0 +1,15 @@
+#ifndef __USB_COMMAND_SWITCH_KEYMAP_H__
+#define __USB_COMMAND_SWITCH_KEYMAP_H__
+
+// Functions:
+
+    void UsbCommand_SwitchKeymap(void);
+
+// Typedefs:
+
+    typedef enum {
+        UsbStatusCode_SwitchKeymap_InvalidAbbreviationLength = 2,
+        UsbStatusCode_SwitchKeymap_InvalidAbbreviation = 3,
+    } usb_status_code_switch_keymap_t;
+
+#endif

right/src/usb_composite_device.c

@@ -1,3 +1,6 @@
+#include "config.h"
+#include "led_display.h"
+#include "slave_drivers/is31fl3731_driver.h"
 #include "usb_device_config.h"
 #include "usb_composite_device.h"
 #include "usb_descriptors/usb_descriptor_hid.h"
@@ -160,21 +163,89 @@ static usb_device_class_config_list_struct_t UsbDeviceCompositeConfigList = {
     }
 }};
 
+static bool computerSleeping = false;
+#ifdef LED_DRIVERS_ENABLED
+static uint8_t oldKeyBacklightBrightness = 0xFF;
+static bool capsLockOn = false, agentOn = false, adaptiveOn = false;
+#endif
+
+bool IsComputerSleeping(void) {
+    return computerSleeping;
+}
+
+static void ComputerIsSleeping(void) {
+    computerSleeping = true;
+#ifdef LED_DRIVERS_ENABLED
+    // Save the state of the icons
+    capsLockOn = LedDisplay_GetIcon(LedDisplayIcon_CapsLock);
+    agentOn = LedDisplay_GetIcon(LedDisplayIcon_Agent);
+    adaptiveOn = LedDisplay_GetIcon(LedDisplayIcon_Adaptive);
+
+    // Disable keyboard backlight
+    oldKeyBacklightBrightness = KeyBacklightBrightness;
+    KeyBacklightBrightness = 0;
+    LedSlaveDriver_Init(LedDriverId_Right);
+    LedSlaveDriver_Init(LedDriverId_Left);
+
+    // Turn layer LEDs off
+    LedDisplay_SetLayer(LayerId_Base);
+
+    // Clear the text
+    LedDisplay_SetText(0, NULL);
+#endif
+}
+
+void WakeupComputer(bool sendResume) {
+    if (sendResume) // The device should wake up the computer
+        USB_DeviceSetStatus(UsbCompositeDevice.deviceHandle, kUSB_DeviceStatusBus, NULL); // Send resume signal - this will call USB_DeviceKhciControl(khciHandle, kUSB_DeviceControlResume, NULL);
+
+    computerSleeping = false; // The computer is now awake
+
+#ifdef LED_DRIVERS_ENABLED
+    // Restore keyboard backlight and text
+    KeyBacklightBrightness = oldKeyBacklightBrightness;
+    LedSlaveDriver_Init(LedDriverId_Right);
+    LedSlaveDriver_Init(LedDriverId_Left);
+
+    // Update the active layer
+    LedDisplay_SetLayer(GetActiveLayer());
+
+    // Restore icon states
+    LedDisplay_SetIcon(LedDisplayIcon_CapsLock, capsLockOn);
+    LedDisplay_SetIcon(LedDisplayIcon_Agent, agentOn);
+    LedDisplay_SetIcon(LedDisplayIcon_Adaptive, adaptiveOn);
+#endif
+}
+
 static usb_status_t usbDeviceCallback(usb_device_handle handle, uint32_t event, void *param)
 {
     usb_status_t status = kStatus_USB_Error;
     uint16_t *temp16 = (uint16_t*)param;
     uint8_t *temp8 = (uint8_t*)param;
 
-    if (!param && event != kUSB_DeviceEventBusReset && event != kUSB_DeviceEventSetInterface) {
+    if (!param && event != kUSB_DeviceEventBusReset && event != kUSB_DeviceEventSetInterface && event != kUSB_DeviceEventSuspend && event != kUSB_DeviceEventResume) {
         return status;
     }
 
+    if (computerSleeping)
+        WakeupComputer(false); // Wake up the keyboard if there is any activity on the bus
+
     switch (event) {
         case kUSB_DeviceEventBusReset:
             UsbCompositeDevice.attach = 0;
             status = kStatus_USB_Success;
             break;
+        case kUSB_DeviceEventSuspend:
+            if (UsbCompositeDevice.attach) {
+                ComputerIsSleeping(); // The computer sends this event when it goes to sleep, so turn off all the LEDs
+                status = kStatus_USB_Success;
+            }
+            break;
+        case kUSB_DeviceEventResume:
+            // We will just wake up the computer if there is any activity on the bus
+            // The problem is that the computer won't send a resume event when it boots, so the lights will never come back on
+            status = kStatus_USB_Success;
+            break;
         case kUSB_DeviceEventSetConfiguration:
             UsbCompositeDevice.attach = 1;
             UsbCompositeDevice.currentConfiguration = *temp8;

right/src/usb_composite_device.h

@@ -33,5 +33,7 @@
 //Functions:
 
     void InitUsb(void);
+    bool IsComputerSleeping(void);
+    void WakeupComputer(bool sendResume);
 
 #endif

right/src/usb_descriptors/usb_descriptor_basic_keyboard_report.c

@@ -36,7 +36,7 @@ uint8_t UsbBasicKeyboardReportDescriptor[USB_BASIC_KEYBOARD_REPORT_DESCRIPTOR_LE
 
         // Scancodes
         HID_RI_LOGICAL_MINIMUM(8, 0x00),
-        HID_RI_LOGICAL_MAXIMUM(8, 0xFF),
+        HID_RI_LOGICAL_MAXIMUM(16, 0xFF),
         HID_RI_USAGE_PAGE(8, HID_RI_USAGE_PAGE_KEY_CODES),
         HID_RI_USAGE_MINIMUM(8, 0x00),
         HID_RI_USAGE_MAXIMUM(8, 0xFF),

right/src/usb_descriptors/usb_descriptor_basic_keyboard_report.h

@@ -3,7 +3,7 @@
 
 // Macros:
 
-    #define USB_BASIC_KEYBOARD_REPORT_DESCRIPTOR_LENGTH 63
+    #define USB_BASIC_KEYBOARD_REPORT_DESCRIPTOR_LENGTH 64
     #define USB_BASIC_KEYBOARD_MAX_KEYS 6
 
 // Variables:

right/src/usb_descriptors/usb_descriptor_generic_hid_report.c

@@ -10,7 +10,7 @@ uint8_t UsbGenericHidReportDescriptor[USB_GENERIC_HID_REPORT_DESCRIPTOR_LENGTH]
         // Input flowing from device to host
         HID_RI_USAGE(8, USB_GENERIC_HID_REPORT_DESCRIPTOR_VENDOR_USAGE_DATA_IN),
         HID_RI_LOGICAL_MINIMUM(8, 0x00),
-        HID_RI_LOGICAL_MAXIMUM(8, 0xFF),
+        HID_RI_LOGICAL_MAXIMUM(16, 0xFF),
         HID_RI_REPORT_SIZE(8, 0x08),
         HID_RI_REPORT_COUNT(8, USB_GENERIC_HID_INTERRUPT_IN_PACKET_SIZE),
         HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
@@ -18,7 +18,7 @@ uint8_t UsbGenericHidReportDescriptor[USB_GENERIC_HID_REPORT_DESCRIPTOR_LENGTH]
         // Output flowing from host to device
         HID_RI_USAGE(8, USB_GENERIC_HID_REPORT_DESCRIPTOR_VENDOR_USAGE_DATA_OUT),
         HID_RI_LOGICAL_MINIMUM(8, 0x00),
-        HID_RI_LOGICAL_MAXIMUM(8, 0xFF),
+        HID_RI_LOGICAL_MAXIMUM(16, 0xFF),
         HID_RI_REPORT_SIZE(8, 0x08),
         HID_RI_REPORT_COUNT(8, USB_GENERIC_HID_INTERRUPT_OUT_PACKET_SIZE),
         HID_RI_OUTPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE),

right/src/usb_descriptors/usb_descriptor_generic_hid_report.h

@@ -3,7 +3,7 @@
 
 // Macros:
 
-    #define USB_GENERIC_HID_REPORT_DESCRIPTOR_LENGTH 31
+    #define USB_GENERIC_HID_REPORT_DESCRIPTOR_LENGTH 33
 
     #define USB_GENERIC_HID_REPORT_DESCRIPTOR_VENDOR_USAGE_PAGE_INDEX 0x80
     #define USB_GENERIC_HID_REPORT_DESCRIPTOR_VENDOR_USAGE_COLLECTION 0x81

right/src/usb_descriptors/usb_descriptor_system_keyboard_report.c

@@ -5,14 +5,16 @@ uint8_t UsbSystemKeyboardReportDescriptor[USB_SYSTEM_KEYBOARD_REPORT_DESCRIPTOR_
     HID_RI_USAGE_PAGE(8, HID_RI_USAGE_PAGE_GENERIC_DESKTOP),
     HID_RI_USAGE(8, HID_RI_USAGE_GENERIC_DESKTOP_SYSTEM_CONTROL),
     HID_RI_COLLECTION(8, HID_RI_COLLECTION_APPLICATION),
-        // System key
-        HID_RI_REPORT_SIZE(8, 2),
-        HID_RI_REPORT_COUNT(8, USB_SYSTEM_KEYBOARD_MAX_KEYS),
-        HID_RI_LOGICAL_MINIMUM(8, 1),
-        HID_RI_LOGICAL_MAXIMUM(8, 3),
-        HID_RI_USAGE(8, 0x82),
-        HID_RI_USAGE(8, 0x81),
-        HID_RI_USAGE(8, 0x83),
-        HID_RI_INPUT(8, HID_IOF_NO_PREFERRED_STATE | HID_IOF_NULLSTATE),
+        // System keys
+        HID_RI_USAGE_MINIMUM(8, 0x81), // SYSTEM_POWER_DOWN, SYSTEM_SLEEP and SYSTEM_WAKE_UP
+        HID_RI_USAGE_MAXIMUM(8, 0x83),
+        HID_RI_REPORT_SIZE(8, 1),
+        HID_RI_REPORT_COUNT(8, 3),
+        HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
+
+        // Padding
+        HID_RI_REPORT_SIZE(8, 1),
+        HID_RI_REPORT_COUNT(8, 5),
+        HID_RI_INPUT(8, HID_IOF_CONSTANT | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE),
     HID_RI_END_COLLECTION(0),
 };

right/src/usb_device_config.h

@@ -23,10 +23,10 @@
 )
 
 // Whether the device is self-powered: 1 supported, 0 not supported
-#define USB_DEVICE_CONFIG_SELF_POWER 1
+#define USB_DEVICE_CONFIG_SELF_POWER 0
 
 // Whether device remote wakeup supported: 1 supported, 0 not supported
-#define USB_DEVICE_CONFIG_REMOTE_WAKEUP 0
+#define USB_DEVICE_CONFIG_REMOTE_WAKEUP 1
 
 // The number of control endpoints, which is always 1
 #define USB_CONTROL_ENDPOINT_COUNT 1

right/src/usb_interfaces/usb_interface_basic_keyboard.c

@@ -1,11 +1,13 @@
+#include "led_display.h"
 #include "usb_composite_device.h"
 
 static usb_basic_keyboard_report_t usbBasicKeyboardReports[2];
 uint32_t UsbBasicKeyboardActionCounter;
 usb_basic_keyboard_report_t* ActiveUsbBasicKeyboardReport = usbBasicKeyboardReports;
-bool IsUsbBasicKeyboardReportSent = false;
+volatile bool IsUsbBasicKeyboardReportSent = false;
+static uint8_t usbBasicKeyboardInBuffer[USB_BASIC_KEYBOARD_REPORT_LENGTH];
 
-usb_basic_keyboard_report_t* getInactiveUsbBasicKeyboardReport(void)
+static usb_basic_keyboard_report_t* getInactiveUsbBasicKeyboardReport(void)
 {
     return ActiveUsbBasicKeyboardReport == usbBasicKeyboardReports ? usbBasicKeyboardReports+1 : usbBasicKeyboardReports;
 }
@@ -41,10 +43,28 @@ usb_status_t UsbBasicKeyboardCallback(class_handle_t handle, uint32_t event, voi
             }
             break;
         case kUSB_DeviceHidEventGetReport:
-        case kUSB_DeviceHidEventSetReport:
-        case kUSB_DeviceHidEventRequestReportBuffer:
             error = kStatus_USB_InvalidRequest;
             break;
+        case kUSB_DeviceHidEventSetReport: {
+            usb_device_hid_report_struct_t *report = (usb_device_hid_report_struct_t*)param;
+            if (report->reportType == USB_DEVICE_HID_REQUEST_GET_REPORT_TYPE_OUPUT && report->reportId == 0 && report->reportLength == 1) {
+                LedDisplay_SetIcon(LedDisplayIcon_CapsLock, report->reportBuffer[0] & HID_KEYBOARD_LED_CAPSLOCK);
+                error = kStatus_USB_Success;
+            } else {
+                error = kStatus_USB_InvalidRequest;
+            }
+            break;
+        }
+        case kUSB_DeviceHidEventRequestReportBuffer: {
+            usb_device_hid_report_struct_t *report = (usb_device_hid_report_struct_t*)param;
+            if (report->reportLength <= USB_BASIC_KEYBOARD_REPORT_LENGTH) {
+                report->reportBuffer = usbBasicKeyboardInBuffer;
+                error = kStatus_USB_Success;
+            } else {
+                error = kStatus_USB_InvalidRequest;
+            }
+            break;
+        }
         case kUSB_DeviceHidEventGetIdle:
         case kUSB_DeviceHidEventGetProtocol:
         case kUSB_DeviceHidEventSetIdle:

right/src/usb_interfaces/usb_interface_basic_keyboard.h

@@ -31,7 +31,7 @@
 
 // Variables:
 
-    extern bool IsUsbBasicKeyboardReportSent;
+    extern volatile bool IsUsbBasicKeyboardReportSent;
     extern uint32_t UsbBasicKeyboardActionCounter;
     extern usb_basic_keyboard_report_t* ActiveUsbBasicKeyboardReport;
 

right/src/usb_interfaces/usb_interface_media_keyboard.c

@@ -3,9 +3,9 @@
 uint32_t UsbMediaKeyboardActionCounter;
 static usb_media_keyboard_report_t usbMediaKeyboardReports[2];
 usb_media_keyboard_report_t* ActiveUsbMediaKeyboardReport = usbMediaKeyboardReports;
-bool IsUsbMediaKeyboardReportSent = false;
+volatile bool IsUsbMediaKeyboardReportSent = false;
 
-usb_media_keyboard_report_t* getInactiveUsbMediaKeyboardReport(void)
+static usb_media_keyboard_report_t* getInactiveUsbMediaKeyboardReport(void)
 {
     return ActiveUsbMediaKeyboardReport == usbMediaKeyboardReports ? usbMediaKeyboardReports+1 : usbMediaKeyboardReports;
 }

right/src/usb_interfaces/usb_interface_media_keyboard.h

@@ -28,7 +28,7 @@
 
 // Variables:
 
-    extern bool IsUsbMediaKeyboardReportSent;
+    extern volatile bool IsUsbMediaKeyboardReportSent;
     extern uint32_t UsbMediaKeyboardActionCounter;
     extern usb_media_keyboard_report_t* ActiveUsbMediaKeyboardReport;
 

right/src/usb_interfaces/usb_interface_mouse.c

@@ -3,9 +3,9 @@
 uint32_t UsbMouseActionCounter;
 static usb_mouse_report_t usbMouseReports[2];
 usb_mouse_report_t* ActiveUsbMouseReport = usbMouseReports;
-bool IsUsbMouseReportSent = false;
+volatile bool IsUsbMouseReportSent = false;
 
-usb_mouse_report_t* getInactiveUsbMouseReport(void)
+static usb_mouse_report_t* getInactiveUsbMouseReport(void)
 {
     return ActiveUsbMouseReport == usbMouseReports ? usbMouseReports+1 : usbMouseReports;
 }

right/src/usb_interfaces/usb_interface_mouse.h

@@ -31,7 +31,7 @@
 
 // Variables:
 
-    extern bool IsUsbMouseReportSent;
+    extern volatile bool IsUsbMouseReportSent;
     extern uint32_t UsbMouseActionCounter;
     extern usb_mouse_report_t* ActiveUsbMouseReport;
 

right/src/usb_interfaces/usb_interface_system_keyboard.c

@@ -3,9 +3,9 @@
 uint32_t UsbSystemKeyboardActionCounter;
 static usb_system_keyboard_report_t usbSystemKeyboardReports[2];
 usb_system_keyboard_report_t* ActiveUsbSystemKeyboardReport = usbSystemKeyboardReports;
-bool IsUsbSystemKeyboardReportSent = false;
+volatile bool IsUsbSystemKeyboardReportSent = false;
 
-usb_system_keyboard_report_t* getInactiveUsbSystemKeyboardReport()
+static usb_system_keyboard_report_t* getInactiveUsbSystemKeyboardReport()
 {
     return ActiveUsbSystemKeyboardReport == usbSystemKeyboardReports ? usbSystemKeyboardReports+1 : usbSystemKeyboardReports;
 }

right/src/usb_interfaces/usb_interface_system_keyboard.h

@@ -29,7 +29,7 @@
 
 // Variables:
 
-    extern bool IsUsbSystemKeyboardReportSent;
+    extern volatile bool IsUsbSystemKeyboardReportSent;
     extern uint32_t UsbSystemKeyboardActionCounter;
     extern usb_system_keyboard_report_t* ActiveUsbSystemKeyboardReport;
 

right/src/usb_protocol_handler.c

@@ -16,6 +16,7 @@
 #include "usb_commands/usb_command_send_kboot_command_to_module.h"
 #include "usb_commands/usb_command_get_slave_i2c_errors.h"
 #include "usb_commands/usb_command_set_i2c_baud_rate.h"
+#include "usb_commands/usb_command_switch_keymap.h"
 
 void UsbProtocolHandler(void)
 {
@@ -73,6 +74,9 @@ void UsbProtocolHandler(void)
         case UsbCommandId_SetI2cBaudRate:
             UsbCommand_SetI2cBaudRate();
             break;
+        case UsbCommandId_SwitchKeymap:
+            UsbCommand_SwitchKeymap();
+            break;
         default:
             SetUsbTxBufferUint8(0, UsbStatusCode_InvalidCommand);
             break;

right/src/usb_protocol_handler.h

@@ -33,6 +33,7 @@
         UsbCommandId_GetModuleProperty        = 0x0e,
         UsbCommandId_GetSlaveI2cErrors        = 0x0f,
         UsbCommandId_SetI2cBaudRate           = 0x10,
+        UsbCommandId_SwitchKeymap             = 0x11,
     } usb_command_id_t;
 
     typedef enum {

right/src/usb_report_updater.c

@@ -17,11 +17,11 @@
 #include "config_parser/parse_keymap.h"
 #include "usb_commands/usb_command_get_debug_buffer.h"
 
-uint32_t UsbReportUpdateTime = 0;
-static uint32_t elapsedTime;
+static uint32_t mouseUsbReportUpdateTime = 0;
+static uint32_t mouseElapsedTime;
 
-uint16_t DoubleTapSwitchLayerTimeout = 250;
-uint16_t DoubleTapSwitchLayerReleaseTimeout = 100;
+uint16_t DoubleTapSwitchLayerTimeout = 150;
+static uint16_t DoubleTapSwitchLayerReleaseTimeout = 100;
 
 static bool activeMouseStates[ACTIVE_MOUSE_STATES_COUNT];
 
@@ -53,7 +53,7 @@ mouse_kinetic_state_t MouseScrollState = {
     .acceleratedSpeed = 50,
 };
 
-void processMouseKineticState(mouse_kinetic_state_t *kineticState)
+static void processMouseKineticState(mouse_kinetic_state_t *kineticState)
 {
     float initialSpeed = kineticState->intMultiplier * kineticState->initialSpeed;
     float acceleration = kineticState->intMultiplier * kineticState->acceleration;
@@ -87,18 +87,18 @@ void processMouseKineticState(mouse_kinetic_state_t *kineticState)
 
     if (isMoveAction) {
         if (kineticState->currentSpeed < kineticState->targetSpeed) {
-            kineticState->currentSpeed += acceleration * elapsedTime / 1000;
+            kineticState->currentSpeed += acceleration * (float)mouseElapsedTime / 1000.0f;
             if (kineticState->currentSpeed > kineticState->targetSpeed) {
                 kineticState->currentSpeed = kineticState->targetSpeed;
             }
         } else {
-            kineticState->currentSpeed -= acceleration * elapsedTime / 1000;
+            kineticState->currentSpeed -= acceleration * (float)mouseElapsedTime / 1000.0f;
             if (kineticState->currentSpeed < kineticState->targetSpeed) {
                 kineticState->currentSpeed = kineticState->targetSpeed;
             }
         }
 
-        float distance = kineticState->currentSpeed * elapsedTime / 1000;
+        float distance = kineticState->currentSpeed * (float)mouseElapsedTime / 1000.0f;
 
 
         if (kineticState->isScroll && !kineticState->wasMoveAction) {
@@ -155,8 +155,10 @@ void processMouseKineticState(mouse_kinetic_state_t *kineticState)
     kineticState->wasMoveAction = isMoveAction;
 }
 
-void processMouseActions()
+static void processMouseActions()
 {
+    mouseElapsedTime = Timer_GetElapsedTimeAndSetCurrent(&mouseUsbReportUpdateTime);
+
     processMouseKineticState(&MouseMoveState);
     ActiveUsbMouseReport->x = MouseMoveState.xOut;
     ActiveUsbMouseReport->y = MouseMoveState.yOut;
@@ -193,7 +195,7 @@ static uint8_t basicScancodeIndex = 0;
 static uint8_t mediaScancodeIndex = 0;
 static uint8_t systemScancodeIndex = 0;
 
-void applyKeyAction(key_state_t *keyState, key_action_t *action)
+static void applyKeyAction(key_state_t *keyState, key_action_t *action)
 {
     static key_state_t *doubleTapSwitchLayerKey;
     static uint32_t doubleTapSwitchLayerStartTime;
@@ -245,16 +247,16 @@ void applyKeyAction(key_state_t *keyState, key_action_t *action)
             if (!keyState->previous && previousLayer == LayerId_Base && action->switchLayer.mode == SwitchLayerMode_HoldAndDoubleTapToggle) {
                 if (doubleTapSwitchLayerKey && Timer_GetElapsedTimeAndSetCurrent(&doubleTapSwitchLayerStartTime) < DoubleTapSwitchLayerTimeout) {
                     ToggledLayer = action->switchLayer.layer;
-                    doubleTapSwitchLayerTriggerTime = CurrentTime;
+                    doubleTapSwitchLayerTriggerTime = Timer_GetCurrentTime();
                 } else {
                     doubleTapSwitchLayerKey = keyState;
                 }
-                doubleTapSwitchLayerStartTime = CurrentTime;
+                doubleTapSwitchLayerStartTime = Timer_GetCurrentTime();
             }
             break;
         case KeyActionType_SwitchKeymap:
             if (!keyState->previous) {
-                SwitchKeymap(action->switchKeymap.keymapId);
+                SwitchKeymapById(action->switchKeymap.keymapId);
             }
             break;
     }
@@ -265,14 +267,11 @@ static uint8_t secondaryRoleSlotId;
 static uint8_t secondaryRoleKeyId;
 static secondary_role_t secondaryRole;
 
-#define pos 35
-void updateActiveUsbReports(void)
+static void updateActiveUsbReports(void)
 {
-    SetDebugBufferUint32(pos, 1);
     memset(activeMouseStates, 0, ACTIVE_MOUSE_STATES_COUNT);
 
     static uint8_t previousModifiers = 0;
-    elapsedTime = Timer_GetElapsedTimeAndSetCurrent(&UsbReportUpdateTime);
 
     basicScancodeIndex = 0;
     mediaScancodeIndex = 0;
@@ -300,7 +299,6 @@ void updateActiveUsbReports(void)
         memcpy(&ActiveUsbSystemKeyboardReport, &MacroSystemKeyboardReport, sizeof MacroSystemKeyboardReport);
         return;
     }
-    SetDebugBufferUint32(pos, 2);
 
     for (uint8_t slotId=0; slotId<SLOT_COUNT; slotId++) {
         for (uint8_t keyId=0; keyId<MAX_KEY_COUNT_PER_MODULE; keyId++) {
@@ -354,10 +352,8 @@ void updateActiveUsbReports(void)
             keyState->previous = keyState->current;
         }
     }
-    SetDebugBufferUint32(pos, 4);
 
     processMouseActions();
-    SetDebugBufferUint32(pos, 5);
 
     // When a layer switcher key gets pressed along with another key that produces some modifiers
     // and the accomanying key gets released then keep the related modifiers active a long as the
@@ -372,55 +368,28 @@ void updateActiveUsbReports(void)
 
     previousModifiers = ActiveUsbBasicKeyboardReport->modifiers;
     previousLayer = activeLayer;
-    SetDebugBufferUint32(pos, 7);
 }
 
-bool UsbBasicKeyboardReportEverSent = false;
-bool UsbMediaKeyboardReportEverSent = false;
-bool UsbSystemKeyboardReportEverSent = false;
-bool UsbMouseReportEverSentEverSent = false;
-
 uint32_t UsbReportUpdateCounter;
-static uint32_t lastUsbUpdateTime;
+static uint32_t lastMouseUpdateTime;
 
 void UpdateUsbReports(void)
 {
     UsbReportUpdateCounter++;
 
-    if (Timer_GetElapsedTime(&lastUsbUpdateTime) > 100) {
-        UsbBasicKeyboardReportEverSent = false;
-        UsbMediaKeyboardReportEverSent = false;
-        UsbSystemKeyboardReportEverSent = false;
-        UsbMouseReportEverSentEverSent = false;
+    // Process the key inputs at a constant rate when moving the mouse, so the mouse speed is consistent
+    bool hasActiveMouseState = false;
+    for (uint8_t i=0; i<ACTIVE_MOUSE_STATES_COUNT; i++) {
+        hasActiveMouseState = true;
+        break;
     }
 
-    if (IsUsbBasicKeyboardReportSent) {
-        UsbBasicKeyboardReportEverSent = true;
-    }
-    if (IsUsbMediaKeyboardReportSent) {
-        UsbMediaKeyboardReportEverSent = true;
-    }
-    if (IsUsbSystemKeyboardReportSent) {
-        UsbSystemKeyboardReportEverSent = true;
-    }
-    if (IsUsbMouseReportSent) {
-        UsbMouseReportEverSentEverSent = true;
-    }
-
-    bool areUsbReportsSent = true;
-    if (UsbBasicKeyboardReportEverSent) {
-        areUsbReportsSent &= IsUsbBasicKeyboardReportSent;
-    }
-    if (UsbMediaKeyboardReportEverSent) {
-        areUsbReportsSent &= IsUsbMediaKeyboardReportSent;
-    }
-    if (UsbSystemKeyboardReportEverSent) {
-        areUsbReportsSent &= IsUsbSystemKeyboardReportSent;
-    }
-    if (UsbMouseReportEverSentEverSent) {
-        areUsbReportsSent &= IsUsbMouseReportSent;
-    }
-    if (!areUsbReportsSent) {
+    if (hasActiveMouseState) {
+        if (Timer_GetElapsedTime(&lastMouseUpdateTime) < USB_MOUSE_INTERRUPT_IN_INTERVAL) {
+            return;
+        }
+        Timer_SetCurrentTime(&lastMouseUpdateTime);
+    } else if (!IsUsbBasicKeyboardReportSent || !IsUsbMediaKeyboardReportSent || !IsUsbSystemKeyboardReportSent || !IsUsbMouseReportSent) {
         return;
     }
 
@@ -431,15 +400,35 @@ void UpdateUsbReports(void)
 
     updateActiveUsbReports();
 
-    SwitchActiveUsbBasicKeyboardReport();
-    SwitchActiveUsbMediaKeyboardReport();
-    SwitchActiveUsbSystemKeyboardReport();
-    SwitchActiveUsbMouseReport();
+    static usb_basic_keyboard_report_t last_basic_report = { .scancodes[0] = 0xFF };
+    if (memcmp(ActiveUsbBasicKeyboardReport, &last_basic_report, sizeof(usb_basic_keyboard_report_t)) != 0) {
+        last_basic_report = *ActiveUsbBasicKeyboardReport;
+        SwitchActiveUsbBasicKeyboardReport();
+        IsUsbBasicKeyboardReportSent = false;
+    }
 
-    IsUsbBasicKeyboardReportSent = false;
-    IsUsbMediaKeyboardReportSent = false;
-    IsUsbSystemKeyboardReportSent = false;
-    IsUsbMouseReportSent = false;
+    static usb_media_keyboard_report_t last_media_report = { .scancodes[0] = 0xFF };
+    if (memcmp(ActiveUsbMediaKeyboardReport, &last_media_report, sizeof(usb_media_keyboard_report_t)) != 0) {
+        last_media_report = *ActiveUsbMediaKeyboardReport;
+        SwitchActiveUsbMediaKeyboardReport();
+        IsUsbMediaKeyboardReportSent = false;
+    }
 
-    Timer_SetCurrentTime(&lastUsbUpdateTime);
+    static usb_system_keyboard_report_t last_system_report = { .scancodes[0] = 0xFF };
+    if (memcmp(ActiveUsbSystemKeyboardReport, &last_system_report, sizeof(usb_system_keyboard_report_t)) != 0) {
+        last_system_report = *ActiveUsbSystemKeyboardReport;
+        SwitchActiveUsbSystemKeyboardReport();
+        IsUsbSystemKeyboardReportSent = false;
+    }
+
+    static usb_mouse_report_t last_mouse_report = { .buttons = 0xFF };
+    if (memcmp(ActiveUsbMouseReport, &last_mouse_report, sizeof(usb_mouse_report_t)) != 0) {
+        last_mouse_report = *ActiveUsbMouseReport;
+        SwitchActiveUsbMouseReport();
+        IsUsbMouseReportSent = false;
+    }
+
+    if ((previousLayer != LayerId_Base || !IsUsbBasicKeyboardReportSent || !IsUsbMediaKeyboardReportSent || !IsUsbSystemKeyboardReportSent || !IsUsbMouseReportSent) && IsComputerSleeping()) {
+        WakeupComputer(true); // Wake up the computer if any key is pressed and the computer is sleeping
+    }
 }

scripts/make-release.js

@@ -36,6 +36,7 @@ for (const device of package.devices) {
     mkdir('-p', deviceDir);
     chmod(644, deviceSource);
     cp(deviceSource, `${deviceDir}/firmware.hex`);
+    exec(`cd ${usbDir}; git pull origin master; git checkout master`);
     exec(`${usbDir}/user-config-json-to-bin.ts ${deviceDir}/config.bin`);
 }
 

scripts/package.json

@@ -15,8 +15,8 @@
     "commander": "^2.11.0",
     "shelljs": "^0.7.8"
   },
-  "firmwareVersion": "8.1.1",
-  "deviceProtocolVersion": "4.2.0",
+  "firmwareVersion": "8.1.6",
+  "deviceProtocolVersion": "4.3.0",
   "moduleProtocolVersion": "4.0.0",
   "userConfigVersion": "4.0.0",
   "hardwareConfigVersion": "1.0.0",

shared/versions.h

@@ -20,10 +20,10 @@
 
     #define FIRMWARE_MAJOR_VERSION 8
     #define FIRMWARE_MINOR_VERSION 1
-    #define FIRMWARE_PATCH_VERSION 1
+    #define FIRMWARE_PATCH_VERSION 6
 
     #define DEVICE_PROTOCOL_MAJOR_VERSION 4
-    #define DEVICE_PROTOCOL_MINOR_VERSION 2
+    #define DEVICE_PROTOCOL_MINOR_VERSION 3
     #define DEVICE_PROTOCOL_PATCH_VERSION 0
 
     #define MODULE_PROTOCOL_MAJOR_VERSION 4