42 Commits

Author SHA1 Message Date
László Monda
56f7753afc Bump firmware version to 8.1.0 and update changelog, package.json, and versions.h 2018-01-15 10:35:22 +01:00
László Monda
a0803875c4 Make UsbCommand_GetModuleProperty() branch based on modulePropertyId 2018-01-15 00:04:22 +01:00
László Monda
f5716bdadc Rename some private functions in init_peripherals.c from upper to lower camel case. 2018-01-14 20:30:46 +01:00
László Monda
b76b3c0e4f Slow down main bus I2C baud rate to 30kHz when BusPal is on to make firmware transfer more robust. 2018-01-14 20:27:17 +01:00
László Monda
2661c3d909 Implement DevicePropertyId_Uptime 2018-01-14 18:32:18 +01:00
László Monda
c854e98d84 Implement DevicePropertyId_I2cMainBusBaudRate 2018-01-14 18:10:04 +01:00
László Monda
72d8e49717 Make UsbProtocolHandler() invoke UsbCommand_SetI2cBaudRate() when requested. 2018-01-13 19:54:48 +01:00
László Monda
0fd95b71b2 Add usb_command_set_i2c_baud_rate.[ch] 2018-01-13 03:54:06 +01:00
László Monda
4d83bc2e75 Add I2cMainBusBaudRateBps 2018-01-13 03:29:01 +01:00
László Monda
cf7b05ab72 Make InitI2cMainBus() private. 2018-01-13 03:21:12 +01:00
László Monda
055f1945d0 Include slave_scheduler.h from init_peripherals.c instead of i2c_watchdog.c which I forgot to do in the previous commit. 2018-01-13 03:19:24 +01:00
László Monda
fa4a3abf84 Extract ReinitI2cMainBus() 2018-01-13 03:14:42 +01:00
László Monda
96c7ccd758 Remove some dead code from PIT_I2C_WATCHDOG_HANDLER 2018-01-13 03:03:42 +01:00
László Monda
76d319ec19 Remove comment that says that 100 kHz works with a 20 meter long bridge cable. It was true for UART, not so much for I2C. 2018-01-11 23:44:59 +01:00
László Monda
aab0e8473f Enable left half I2C watchdog in reinit mode because it seems to improve things. 2018-01-11 23:43:34 +01:00
László Monda
4a4c471b9e Implement DevicePropertyId_CurrentKbootCommand 2018-01-10 02:58:31 +01:00
László Monda
fcd75b2af2 Use identifiers instead of the magic numbers of kboot_driver.[ch] 2018-01-06 21:21:36 +01:00
László Monda
f318c6872e Move the definition of previousSlave within the if (isFirstCycle) block. 2018-01-06 17:25:07 +01:00
László Monda
ae1240c103 Rename isFirstIteration to isFirstCycle and kStatus_Uhk_NoTransfer to kStatus_Uhk_IdleCycle. 2018-01-06 17:05:37 +01:00
László Monda
e75d366245 Update and log previous I2C status within the if (isFirstIteration) block. 2018-01-06 17:00:59 +01:00
László Monda
da20cdacc4 Only check currentSlaveId overrun after incrementing it. 2018-01-06 16:36:57 +01:00
László Monda
5a986d367e Only call LogI2cError() if the passed status is an actual I2C error, otherwise it slows the mouse pointer down. 2018-01-06 02:04:47 +01:00
László Monda
f6b66283a7 Only count I2C errors. 2018-01-06 01:37:58 +01:00
László Monda
6ad425cbf9 Log I2C error counts on a per slave and per error type basis and expose them via USB. 2018-01-05 03:23:48 +01:00
László Monda
33e501cd83 Add SLAVE_COUNT 2018-01-04 23:16:48 +01:00
László Monda
fa558abef3 Add LED_DRIVERS_ENABLED 2017-12-28 00:08:29 +01:00
László Monda
25a2b3af93 Convert tabs to spaces. 2017-12-27 17:21:28 +01:00
László Monda
43587c2e1f Define I2C_WATCHDOG_VALUE_REINIT and I2C_WATCHDOG_VALUE_REBOOT and make them work when assigned to I2C_WATCHDOG. 2017-12-27 17:07:04 +01:00
László Monda
c51542795f Bump version to 8.0.1 2017-12-25 23:16:27 +01:00
Erich Styger
7eb83173ed changed I2C watchdog timer implementation, as LPTMR was already used by key scanner 2017-12-25 17:15:41 +01:00
Erich Styger
5581dd26b5 fixed and enabled software watchdog timer 2017-12-24 12:06:46 +01:00
László Monda
1ac637af0f Rename the GetProperty command to GetDeviceProperty. 2017-12-23 16:11:47 +01:00
László Monda
36951d1a34 Minor cleanups regarding the previous rename. 2017-12-23 16:08:45 +01:00
László Monda
5190265a2c Rename get_module_properties.[ch] to get_module_property.[ch]. It seems that the header wasn't included in usb_protocol_handler.c possibly causing issues when using these commands. 2017-12-23 16:06:24 +01:00
László Monda
40bf252852 Bump version to 8.0.0. Update version numbers. Update changelog. 2017-12-15 04:03:51 +01:00
László Monda
85e92d21b4 Add new UsbCommand_GetModuleProperties() device protocol command. 2017-12-15 02:46:30 +01:00
László Monda
fd43e81e46 Query module key count and pointer count in separate messages instead of a combined message for better clarity. 2017-12-15 02:13:58 +01:00
László Monda
c994a97d03 Make the modules transfer their firmware version to the device. Fix the message length of the module protocol version. 2017-12-15 01:42:58 +01:00
László Monda
d59ba83d99 Make the modules transfer a module protocol version composed of a major, a minor and a patch number. 2017-12-15 01:28:13 +01:00
László Monda
c1b887cea8 Rename UhkModulePhase_*ProtocolVersion to UhkModulePhase_*ModuleProtocolVersion. 2017-12-15 01:16:27 +01:00
László Monda
bd53b73685 Rename usb_command_get_keyboard_state.[ch] to usb_command_get_device_state.[ch] 2017-12-14 23:10:13 +01:00
László Monda
beb7c3d4ee Forgot to update versions.h for the previous release. Updating now. 2017-12-14 23:08:34 +01:00
48 changed files with 569 additions and 201 deletions

View File

@@ -5,6 +5,32 @@ All notable changes to this project will be documented in this file.
The format is loosely based on [Keep a Changelog](http://keepachangelog.com/en/1.0.0/)
and this project adheres to the [UHK Versioning](VERSIONING.md) conventions.
## [8.1.0] - 2018-01-15
Device Protocol: 4.**2**.0 | Module Protocol: 4.0.0 | User Config: 4.0.0 | Hardware Config: 1.0.0
- Enable left-half watchdog in reinit mode which seems to prevent freezes.
- Slow down main bus I2C baud rate to 30kHz when BusPal is on to make firmware transfer more robust.
- Implement UsbCommandId_GetSlaveI2cErrors. `DEVICEPROTOCOL:MINOR`
- Implement UsbCommandId_SetI2cBaudRate. `DEVICEPROTOCOL:MINOR`
- Implement DevicePropertyId_CurrentKbootCommand. `DEVICEPROTOCOL:MINOR`
- Implement DevicePropertyId_I2cMainBusBaudRate. `DEVICEPROTOCOL:MINOR`
- Implement DevicePropertyId_Uptime. `DEVICEPROTOCOL:MINOR`
## [8.0.1] - 2017-12-25
Device Protocol: 4.1.0 | Module Protocol: 4.0.0 | User Config: 4.0.0 | Hardware Config: 1.0.0
- Implement I2C watchdog for the left keyboard half which should resolve the occasional hangs of the left keyboard half.
## [8.0.0] - 2017-12-15
Device Protocol: 4.**1.0** | Module Protocol: **4.0.0** | User Config: 4.0.0 | Hardware Config: 1.0.0
- Make the modules transfer the module protocol version and firmware version composed of a major, a minor and a patch number. `MODULEPROTOCOL:MAJOR`
- Query module key count and pointer count in separate messages instead of a combined message for improved clarity. `MODULEPROTOCOL:MAJOR`
- Add new UsbCommand_GetModuleProperties() device protocol command. `DEVICEPROTOCOL:MINOR`
## [7.0.0] - 2017-12-14
Device Protocol: **4.0.0** | Module Protocol: 3.0.0 | User Config: 4.0.0 | Hardware Config: 1.0.0

View File

@@ -50,7 +50,7 @@
<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="2331"/>
<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="false"/>
<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="false"/>
<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
@@ -77,6 +77,6 @@
<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
<listEntry value="4"/>
</listAttribute>
<stringAttribute key="org.eclipse.dsf.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#10;&lt;memoryBlockExpressionList context=&quot;Context string&quot;/&gt;&#10;"/>
<stringAttribute key="org.eclipse.dsf.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList context=&quot;Context string&quot;/&gt;&#13;&#10;"/>
<stringAttribute key="process_factory_id" value="org.eclipse.cdt.dsf.gdb.GdbProcessFactory"/>
</launchConfiguration>

View File

@@ -77,6 +77,6 @@
<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
<listEntry value="4"/>
</listAttribute>
<stringAttribute key="org.eclipse.dsf.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#10;&lt;memoryBlockExpressionList context=&quot;Context string&quot;/&gt;&#10;"/>
<stringAttribute key="org.eclipse.dsf.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList context=&quot;Context string&quot;/&gt;&#13;&#10;"/>
<stringAttribute key="process_factory_id" value="org.eclipse.cdt.dsf.gdb.GdbProcessFactory"/>
</launchConfiguration>

View File

@@ -3,6 +3,11 @@
// Macros:
#define I2C_WATCHDOG_VALUE_REINIT 1
#define I2C_WATCHDOG_VALUE_REBOOT 2
// #define DEBUG_OVER_SPI
#define I2C_WATCHDOG I2C_WATCHDOG_VALUE_REINIT
// #define I2C_WATCHDOG I2C_WATCHDOG_VALUE_REBOOT
#endif

View File

@@ -3,36 +3,40 @@
#include "i2c_watchdog.h"
#include "test_led.h"
#include "init_peripherals.h"
#include "config.h"
//static uint32_t prevWatchdogCounter = 0;
uint32_t I2cWatchdog_RecoveryCounter;
volatile uint32_t I2cWatchdog_WatchCounter;
/* NOTE: Because of a bug in the ROM bootloader of the KL03Z, the watchdog timer is disabled and cannot be re-enabled.
* See https://community.nxp.com/thread/457893
* Therefore the hardware watchdog timer cannot be used without an extra way to enter bootloader or application mode.
*/
#ifdef I2C_WATCHDOG
static uint32_t prevWatchdogCounter = 0;
static uint32_t I2cWatchdog_RecoveryCounter; /* counter for how many times we had to recover and restart */
void InitI2cWatchdog(void)
{
lptmr_config_t lptmrConfig;
LPTMR_GetDefaultConfig(&lptmrConfig);
LPTMR_Init(LPTMR0, &lptmrConfig);
LPTMR_SetTimerPeriod(LPTMR0, USEC_TO_COUNT(LPTMR_USEC_COUNT, LPTMR_SOURCE_CLOCK));
LPTMR_EnableInterrupts(LPTMR0, kLPTMR_TimerInterruptEnable);
EnableIRQ(LPTMR0_IRQn);
LPTMR_StartTimer(LPTMR0);
}
/*
void I2C_WATCHDOG_LPTMR_HANDLER(void)
void RunWatchdog(void)
{
static volatile uint32_t I2cWatchdog_WatchCounter = 0; /* counter for timer */
static int cntr = 0;
cntr++;
if (cntr==100) { /* we get called from KEY_SCANNER_HANDLER() which runs at 1ms, thus scaling down by 100 here to get 100 ms period */
cntr=0;
TEST_LED_TOGGLE();
I2cWatchdog_WatchCounter++;
if (I2C_Watchdog == prevWatchdogCounter) { // Restart I2C if there hasn't been any interrupt during 100 ms
// NVIC_SystemReset();
if (I2cWatchdog_WatchCounter>10) { /* do not check within the first 1000 ms, as I2C might not be running yet */
if (I2C_Watchdog == prevWatchdogCounter) { // Restart I2C if there hasn't been any interrupt during 100 ms. I2C_Watchdog gets incremented for every I2C transaction
I2cWatchdog_RecoveryCounter++;
#if I2C_WATCHDOG == I2C_WATCHDOG_VALUE_REBOOT
NVIC_SystemReset();
#endif
#if I2C_WATCHDOG == I2C_WATCHDOG_VALUE_REINIT
I2C_SlaveDeinit(I2C_BUS_BASEADDR);
InitI2c();
initI2c();
#endif
}
prevWatchdogCounter = I2C_Watchdog;
LPTMR_ClearStatusFlags(LPTMR0, kLPTMR_TimerCompareFlag);
}
*/
prevWatchdogCounter = I2C_Watchdog; /* remember previous counter */
}
}
#endif

View File

@@ -13,7 +13,6 @@
// Functions:
void InitI2cWatchdog(void);
void RunWatchdog(void);
#endif

View File

@@ -10,6 +10,7 @@
#include "slave_protocol_handler.h"
#include "i2c_watchdog.h"
#include "debug_over_spi.h"
#include "main.h"
i2c_slave_config_t slaveConfig;
i2c_slave_handle_t slaveHandle;
@@ -44,14 +45,14 @@ static void i2cSlaveCallback(I2C_Type *base, i2c_slave_transfer_t *xfer, void *u
}
}
void InitInterruptPriorities(void)
void initInterruptPriorities(void)
{
NVIC_SetPriority(I2C0_IRQn, 1);
NVIC_SetPriority(TPM1_IRQn, 1);
NVIC_SetPriority(SPI0_IRQn, 1);
}
void InitI2c(void)
void initI2c(void)
{
port_pin_config_t pinConfig = {
.pullSelect = kPORT_PullUp,
@@ -81,11 +82,10 @@ void InitLedDriver(void)
void InitPeripherals(void)
{
InitInterruptPriorities();
initInterruptPriorities();
InitLedDriver();
InitTestLed();
LedPwm_Init();
// InitI2cWatchdog();
DebugOverSpi_Init();
InitI2c();
initI2c();
}

View File

@@ -11,6 +11,6 @@
// Functions:
void InitPeripherals(void);
void InitI2c(void);
void initI2c(void);
#endif

View File

@@ -1,10 +1,14 @@
#include "fsl_lptmr.h"
#include "key_scanner.h"
#include "main.h"
#include "config.h"
#include "i2c_watchdog.h"
void KEY_SCANNER_HANDLER(void)
{
KeyMatrix_ScanRow(&keyMatrix);
#ifdef I2C_WATCHDOG
RunWatchdog();
#endif
LPTMR_ClearStatusFlags(KEY_SCANNER_LPTMR_BASEADDR, kLPTMR_TimerCompareFlag);
}

View File

@@ -6,6 +6,6 @@
#define MODULE_PROTOCOL_VERSION 1
#define MODULE_ID ModuleId_LeftKeyboardHalf
#define MODULE_KEY_COUNT (KEYBOARD_MATRIX_ROWS_NUM * KEYBOARD_MATRIX_COLS_NUM)
#define MODULE_HAS_POINTER false
#define MODULE_POINTER_COUNT 0
#endif

View File

@@ -10,10 +10,23 @@
#include "bool_array_converter.h"
#include "bootloader.h"
#include "module.h"
#include "versions.h"
i2c_message_t RxMessage;
i2c_message_t TxMessage;
static version_t moduleProtocolVersion = {
MODULE_PROTOCOL_MAJOR_VERSION,
MODULE_PROTOCOL_MINOR_VERSION,
MODULE_PROTOCOL_PATCH_VERSION,
};
static version_t firmwareVersion = {
FIRMWARE_MAJOR_VERSION,
FIRMWARE_MINOR_VERSION,
FIRMWARE_PATCH_VERSION,
};
void SlaveRxHandler(void)
{
if (!CRC16_IsMessageValid(&RxMessage)) {
@@ -51,21 +64,29 @@ void SlaveTxHandler(void)
TxMessage.length = SLAVE_SYNC_STRING_LENGTH;
break;
}
case SlaveProperty_ModuleProtocolVersion: {
memcpy(TxMessage.data, &moduleProtocolVersion, sizeof(version_t));
TxMessage.length = sizeof(version_t);
break;
}
case SlaveProperty_FirmwareVersion: {
memcpy(TxMessage.data, &firmwareVersion, sizeof(version_t));
TxMessage.length = sizeof(version_t);
break;
}
case SlaveProperty_ModuleId: {
TxMessage.data[0] = MODULE_ID;
TxMessage.length = 1;
break;
}
case SlaveProperty_ProtocolVersion: {
TxMessage.data[0] = MODULE_PROTOCOL_VERSION;
case SlaveProperty_KeyCount: {
TxMessage.data[0] = MODULE_KEY_COUNT;
TxMessage.length = 1;
break;
}
case SlaveProperty_Features: {
uhk_module_features_t *moduleFeatures = (uhk_module_features_t*)&TxMessage.data;
moduleFeatures->keyCount = MODULE_KEY_COUNT;
moduleFeatures->hasPointer = MODULE_HAS_POINTER;
TxMessage.length = sizeof(uhk_module_features_t);
case SlaveProperty_PointerCount: {
TxMessage.data[0] = MODULE_POINTER_COUNT;
TxMessage.length = 1;
break;
}
}

View File

@@ -64,10 +64,10 @@
<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="uhk60-right_debug/uhk-right.elf"/>
<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="uhk60-right_debug_standalone/uhk-right.elf"/>
<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="uhk-right"/>
<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="false"/>
<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="ilg.gnuarmeclipse.managedbuild.cross.config.elf.release.1939339834.1692217331.1297236062.2081695142"/>
<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value=""/>
<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
<listEntry value="/uhk-right"/>
</listAttribute>
@@ -77,6 +77,6 @@
<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
</listAttribute>
<stringAttribute key="org.eclipse.dsf.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#10;&lt;memoryBlockExpressionList context=&quot;Context string&quot;/&gt;&#10;"/>
<stringAttribute key="org.eclipse.dsf.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList context=&quot;Context string&quot;/&gt;&#13;&#10;"/>
<stringAttribute key="process_factory_id" value="org.eclipse.cdt.dsf.gdb.GdbProcessFactory"/>
</launchConfiguration>

View File

@@ -4,6 +4,7 @@
// Macros:
#define I2C_WATCHDOG
#define LED_DRIVERS_ENABLED
// #define LED_DRIVER_STRESS_TEST
#endif

View File

@@ -8,6 +8,7 @@
#include "led_display.h"
#include "slave_scheduler.h"
#include "slave_drivers/is31fl3731_driver.h"
#include "config.h"
static parser_error_t parseModuleConfiguration(config_buffer_t *buffer)
{
@@ -142,9 +143,10 @@ parser_error_t ParseConfig(config_buffer_t *buffer)
IconsAndLayerTextsBrightness = iconsAndLayerTextsBrightness;
AlphanumericSegmentsBrightness = alphanumericSegmentsBrightness;
KeyBacklightBrightness = keyBacklightBrightness;
#ifdef LED_DRIVERS_ENABLED
Slaves[SlaveId_LeftLedDriver].isConnected = false;
Slaves[SlaveId_RightLedDriver].isConnected = false;
#endif
// Update mouse key speeds
MouseMoveState.initialSpeed = mouseMoveInitialSpeed;

View File

@@ -13,7 +13,8 @@
#define I2C_MAIN_BUS_BASEADDR I2C0
#define I2C_MAIN_BUS_IRQ_ID I2C0_IRQn
#define I2C_MAIN_BUS_CLK_SRC I2C0_CLK_SRC
#define I2C_MAIN_BUS_BAUD_RATE 100000 // 100 kHz works even with a 20 meter long bridge cable.
#define I2C_MAIN_BUS_NORMAL_BAUD_RATE 100000
#define I2C_MAIN_BUS_BUSPAL_BAUD_RATE 30000
#define I2C_MAIN_BUS_MUX kPORT_MuxAlt7
#define I2C_MAIN_BUS_SDA_GPIO GPIOD

View File

@@ -0,0 +1,25 @@
#include "fsl_i2c.h"
#include "i2c_error_logger.h"
i2c_slave_error_counter_t I2cSlaveErrorCounters[MAX_SLAVE_COUNT];
void LogI2cError(uint8_t slaveId, status_t status)
{
i2c_slave_error_counter_t *i2cSlaveErrorCounter = I2cSlaveErrorCounters + slaveId;
uint8_t errorIdx;
for (errorIdx=0; errorIdx<i2cSlaveErrorCounter->errorTypeCount; errorIdx++) {
i2c_error_count_t *currentI2cError = i2cSlaveErrorCounter->errors + errorIdx;
if (currentI2cError->status == status) {
currentI2cError->count++;
break;
}
}
if (errorIdx == i2cSlaveErrorCounter->errorTypeCount && errorIdx < MAX_LOGGED_I2C_ERROR_TYPES_PER_SLAVE) {
i2cSlaveErrorCounter->errorTypeCount++;
i2c_error_count_t *currentI2cError = i2cSlaveErrorCounter->errors + errorIdx;
currentI2cError->status = status;
currentI2cError->count = 1;
}
}

View File

@@ -0,0 +1,33 @@
#ifndef __I2C_ERROR_LOGGER_H__
#define __I2C_ERROR_LOGGER_H__
// Includes:
#include "fsl_common.h"
#include "slave_scheduler.h"
// Macros:
#define MAX_LOGGED_I2C_ERROR_TYPES_PER_SLAVE 7
// Typedefs:
typedef struct {
status_t status;
uint32_t count;
} i2c_error_count_t;
typedef struct {
uint8_t errorTypeCount;
i2c_error_count_t errors[MAX_LOGGED_I2C_ERROR_TYPES_PER_SLAVE];
} i2c_slave_error_counter_t;
// Variables:
extern i2c_slave_error_counter_t I2cSlaveErrorCounters[MAX_SLAVE_COUNT];
// Functions:
void LogI2cError(uint8_t slaveId, status_t status);
#endif

View File

@@ -5,7 +5,6 @@
#include "fsl_gpio.h"
#include "i2c.h"
#include "i2c_watchdog.h"
#include "slave_scheduler.h"
#include "init_peripherals.h"
uint32_t I2cWatchdog_WatchCounter;
@@ -19,17 +18,13 @@ static uint32_t prevWatchdogCounter;
void PIT_I2C_WATCHDOG_HANDLER(void)
{
I2cWatchdog_WatchCounter++;
if (I2C_Watchdog == prevWatchdogCounter) { // Restart I2C if there haven't been any interrupts recently
I2cWatchdog_RecoveryCounter++;
i2c_master_config_t masterConfig;
I2C_MasterGetDefaultConfig(&masterConfig);
I2C_MasterDeinit(I2C_MAIN_BUS_BASEADDR);
InitI2cMainBus();
InitSlaveScheduler();
ReinitI2cMainBus();
}
prevWatchdogCounter = I2C_Watchdog;
PIT_ClearStatusFlags(PIT, PIT_I2C_WATCHDOG_CHANNEL, PIT_TFLG_TIF_MASK);
}

View File

@@ -14,8 +14,22 @@
#include "timer.h"
#include "key_debouncer.h"
#include "usb_api.h"
#include "slave_scheduler.h"
#include "bootloader/wormhole.h"
void InitInterruptPriorities(void)
bool IsBusPalOn;
uint32_t I2cMainBusRequestedBaudRateBps = I2C_MAIN_BUS_NORMAL_BAUD_RATE;
uint32_t I2cMainBusActualBaudRateBps;
void initBusPalState(void) {
IsBusPalOn = Wormhole.magicNumber == WORMHOLE_MAGIC_NUMBER && Wormhole.enumerationMode == EnumerationMode_BusPal;
if (IsBusPalOn) {
Wormhole.magicNumber = 0;
I2cMainBusRequestedBaudRateBps = I2C_MAIN_BUS_BUSPAL_BAUD_RATE;
}
}
void initInterruptPriorities(void)
{
NVIC_SetPriority(PIT_I2C_WATCHDOG_IRQ_ID, 1);
NVIC_SetPriority(PIT_TIMER_IRQ_ID, 2);
@@ -60,7 +74,7 @@ void recoverI2c(void)
delay();
}
void InitI2cMainBus(void)
void initI2cMainBus(void)
{
CLOCK_EnableClock(I2C_MAIN_BUS_SDA_CLOCK);
CLOCK_EnableClock(I2C_MAIN_BUS_SCL_CLOCK);
@@ -78,9 +92,17 @@ void InitI2cMainBus(void)
i2c_master_config_t masterConfig;
I2C_MasterGetDefaultConfig(&masterConfig);
masterConfig.baudRate_Bps = I2C_MAIN_BUS_BAUD_RATE;
masterConfig.baudRate_Bps = I2cMainBusRequestedBaudRateBps;
uint32_t sourceClock = CLOCK_GetFreq(I2C_MAIN_BUS_CLK_SRC);
I2C_MasterInit(I2C_MAIN_BUS_BASEADDR, &masterConfig, sourceClock);
I2cMainBusActualBaudRateBps = I2C_ActualBaudRate;
}
void ReinitI2cMainBus(void)
{
I2C_MasterDeinit(I2C_MAIN_BUS_BASEADDR);
initI2cMainBus();
InitSlaveScheduler();
}
void initI2cEepromBus(void)
@@ -91,7 +113,6 @@ void initI2cEepromBus(void)
.mux = I2C_EEPROM_BUS_MUX,
};
CLOCK_EnableClock(I2C_EEPROM_BUS_SDA_CLOCK);
CLOCK_EnableClock(I2C_EEPROM_BUS_SCL_CLOCK);
@@ -105,21 +126,22 @@ void initI2cEepromBus(void)
I2C_MasterInit(I2C_EEPROM_BUS_BASEADDR, &masterConfig, sourceClock);
}
void InitI2c(void)
void initI2c(void)
{
InitI2cMainBus();
initI2cMainBus();
initI2cEepromBus();
}
void InitPeripherals(void)
{
InitInterruptPriorities();
initBusPalState();
initInterruptPriorities();
Timer_Init();
InitLedDriver();
InitResetButton();
InitMergeSensor();
ADC_Init();
InitI2c();
initI2c();
InitTestLed();
LedPwm_Init();
#ifdef I2C_WATCHDOG

View File

@@ -5,9 +5,15 @@
#include "fsl_common.h"
// Variables:
extern bool IsBusPalOn;
extern uint32_t I2cMainBusRequestedBaudRateBps;
extern uint32_t I2cMainBusActualBaudRateBps;
// Functions:
void InitPeripherals(void);
void InitI2cMainBus(void);
void ReinitI2cMainBus(void);
#endif

View File

@@ -5,7 +5,6 @@
#include "slave_scheduler.h"
#include "bus_pal_hardware.h"
#include "command.h"
#include "bootloader/wormhole.h"
#include "eeprom.h"
#include "key_scanner.h"
#include "usb_commands/usb_command_apply_config.h"
@@ -34,8 +33,7 @@ void main(void)
EEPROM_LaunchTransfer(EepromOperation_Read, ConfigBufferId_HardwareConfig, hardwareConfigurationReadFinished);
}
if (Wormhole.magicNumber == WORMHOLE_MAGIC_NUMBER && Wormhole.enumerationMode == EnumerationMode_BusPal) {
Wormhole.magicNumber = 0;
if (IsBusPalOn) {
init_hardware();
handleUsbBusPalCommand();
} else {

View File

@@ -4,7 +4,7 @@
kboot_driver_state_t KbootDriverState;
static uint8_t rxBuffer[MAX_KBOOT_COMMAND_LENGTH];
static uint8_t rxBuffer[KBOOT_PACKAGE_MAX_LENGTH];
static uint8_t pingCommand[] = {0x5a, 0xa6};
static uint8_t resetCommand[] = {0x5a, 0xa4, 0x04, 0x00, 0x6f, 0x46, 0x0b, 0x00, 0x00, 0x00};
static uint8_t ackMessage[] = {0x5a, 0xa1};
@@ -27,50 +27,52 @@ status_t KbootSlaveDriver_Update(uint8_t kbootInstanceId)
{
status_t status = kStatus_Uhk_IdleSlave;
switch (KbootDriverState.commandType) {
switch (KbootDriverState.command) {
case KbootCommand_Idle:
break;
case KbootCommand_Ping:
switch (KbootDriverState.phase) {
case 0:
case KbootPhase_SendPing:
status = tx(pingCommand, sizeof(pingCommand));
KbootDriverState.phase++;
KbootDriverState.phase = KbootPhase_CheckPingStatus;
break;
case 1:
case KbootPhase_CheckPingStatus:
KbootDriverState.status = Slaves[SlaveId_KbootDriver].previousStatus;
KbootDriverState.phase = KbootDriverState.status == kStatus_Success ? 2 : 0;
return kStatus_Uhk_NoTransfer;
case 2:
status = rx(10);
KbootDriverState.phase++;
KbootDriverState.phase = KbootDriverState.status == kStatus_Success
? KbootPhase_ReceivePingResponse
: KbootPhase_SendPing;
return kStatus_Uhk_IdleCycle;
case KbootPhase_ReceivePingResponse:
status = rx(KBOOT_PACKAGE_LENGTH_PING_RESPONSE);
KbootDriverState.phase = KbootPhase_CheckPingResponseStatus;
break;
case 3:
case KbootPhase_CheckPingResponseStatus:
KbootDriverState.status = Slaves[SlaveId_KbootDriver].previousStatus;
if (KbootDriverState.status == kStatus_Success) {
KbootDriverState.commandType = KbootCommand_Idle;
KbootDriverState.command = KbootCommand_Idle;
} else {
KbootDriverState.phase = 0;
return kStatus_Uhk_NoTransfer;
KbootDriverState.phase = KbootPhase_SendPing;
return kStatus_Uhk_IdleCycle;
}
}
break;
case KbootCommand_Reset:
switch (KbootDriverState.phase) {
case 0:
case KbootPhase_SendReset:
status = tx(resetCommand, sizeof(resetCommand));
KbootDriverState.phase++;
KbootDriverState.phase = KbootPhase_ReceiveResetAck;
break;
case 1:
status = rx(2);
KbootDriverState.phase++;
case KbootPhase_ReceiveResetAck:
status = rx(KBOOT_PACKAGE_LENGTH_ACK);
KbootDriverState.phase = KbootPhase_ReceiveResetGenericResponse;
break;
case 2:
status = rx(18);
KbootDriverState.phase++;
case KbootPhase_ReceiveResetGenericResponse:
status = rx(KBOOT_PACKAGE_LENGTH_GENERIC_RESPONSE);
KbootDriverState.phase = KbootPhase_CheckResetSendAck;
break;
case 3:
case KbootPhase_CheckResetSendAck:
status = tx(ackMessage, sizeof(ackMessage));
KbootDriverState.commandType = KbootCommand_Idle;
KbootDriverState.command = KbootCommand_Idle;
break;
}
break;

View File

@@ -7,7 +7,10 @@
// Macros:
#define MAX_KBOOT_COMMAND_LENGTH 32
#define KBOOT_PACKAGE_MAX_LENGTH 32
#define KBOOT_PACKAGE_LENGTH_PING_RESPONSE 10
#define KBOOT_PACKAGE_LENGTH_ACK 2
#define KBOOT_PACKAGE_LENGTH_GENERIC_RESPONSE 18
// Typedefs:
@@ -21,8 +24,22 @@
KbootCommand_Reset,
} kboot_command_t;
typedef enum {
KbootPhase_SendPing,
KbootPhase_CheckPingStatus,
KbootPhase_ReceivePingResponse,
KbootPhase_CheckPingResponseStatus,
} kboot_ping_phase_t;
typedef enum {
KbootPhase_SendReset,
KbootPhase_ReceiveResetAck,
KbootPhase_ReceiveResetGenericResponse,
KbootPhase_CheckResetSendAck,
} kboot_reset_phase_t;
typedef struct {
kboot_command_t commandType;
kboot_command_t command;
uint8_t i2cAddress;
uint8_t phase;
uint32_t status;

View File

@@ -91,32 +91,54 @@ status_t UhkModuleSlaveDriver_Update(uint8_t uhkModuleDriverId)
case UhkModulePhase_ProcessSync: {
bool isMessageValid = CRC16_IsMessageValid(rxMessage);
bool isSyncValid = memcmp(rxMessage->data, SlaveSyncString, SLAVE_SYNC_STRING_LENGTH) == 0;
status = kStatus_Uhk_NoTransfer;
status = kStatus_Uhk_IdleCycle;
*uhkModulePhase = isSyncValid && isMessageValid
? UhkModulePhase_RequestProtocolVersion
? UhkModulePhase_RequestModuleProtocolVersion
: UhkModulePhase_RequestSync;
break;
}
// Get protocol version
case UhkModulePhase_RequestProtocolVersion:
// Get module protocol version
case UhkModulePhase_RequestModuleProtocolVersion:
txMessage.data[0] = SlaveCommand_RequestProperty;
txMessage.data[1] = SlaveProperty_ProtocolVersion;
txMessage.data[1] = SlaveProperty_ModuleProtocolVersion;
txMessage.length = 2;
status = tx(i2cAddress);
*uhkModulePhase = UhkModulePhase_ReceiveProtocolVersion;
*uhkModulePhase = UhkModulePhase_ReceiveModuleProtocolVersion;
break;
case UhkModulePhase_ReceiveProtocolVersion:
case UhkModulePhase_ReceiveModuleProtocolVersion:
status = rx(rxMessage, i2cAddress);
*uhkModulePhase = UhkModulePhase_ProcessProtocolVersion;
*uhkModulePhase = UhkModulePhase_ProcessModuleProtocolVersion;
break;
case UhkModulePhase_ProcessProtocolVersion: {
case UhkModulePhase_ProcessModuleProtocolVersion: {
bool isMessageValid = CRC16_IsMessageValid(rxMessage);
if (isMessageValid) {
uhkModuleState->protocolVersion = rxMessage->data[0];
memcpy(&uhkModuleState->moduleProtocolVersion, rxMessage->data, sizeof(version_t));
}
status = kStatus_Uhk_NoTransfer;
*uhkModulePhase = isMessageValid ? UhkModulePhase_RequestModuleId : UhkModulePhase_RequestProtocolVersion;
status = kStatus_Uhk_IdleCycle;
*uhkModulePhase = isMessageValid ? UhkModulePhase_RequestFirmwareVersion : UhkModulePhase_RequestModuleProtocolVersion;
break;
}
// Get firmware version
case UhkModulePhase_RequestFirmwareVersion:
txMessage.data[0] = SlaveCommand_RequestProperty;
txMessage.data[1] = SlaveProperty_FirmwareVersion;
txMessage.length = 2;
status = tx(i2cAddress);
*uhkModulePhase = UhkModulePhase_ReceiveFirmwareVersion;
break;
case UhkModulePhase_ReceiveFirmwareVersion:
status = rx(rxMessage, i2cAddress);
*uhkModulePhase = UhkModulePhase_ProcessFirmwareVersion;
break;
case UhkModulePhase_ProcessFirmwareVersion: {
bool isMessageValid = CRC16_IsMessageValid(rxMessage);
if (isMessageValid) {
memcpy(&uhkModuleState->firmwareVersion, rxMessage->data, sizeof(version_t));
}
status = kStatus_Uhk_IdleCycle;
*uhkModulePhase = isMessageValid ? UhkModulePhase_RequestModuleId : UhkModulePhase_RequestFirmwareVersion;
break;
}
@@ -137,30 +159,52 @@ status_t UhkModuleSlaveDriver_Update(uint8_t uhkModuleDriverId)
if (isMessageValid) {
uhkModuleState->moduleId = rxMessage->data[0];
}
status = kStatus_Uhk_NoTransfer;
*uhkModulePhase = isMessageValid ? UhkModulePhase_RequestModuleFeatures : UhkModulePhase_RequestModuleId;
status = kStatus_Uhk_IdleCycle;
*uhkModulePhase = isMessageValid ? UhkModulePhase_RequestModuleKeyCount : UhkModulePhase_RequestModuleId;
break;
}
// Get module features
case UhkModulePhase_RequestModuleFeatures:
// Get module key count
case UhkModulePhase_RequestModuleKeyCount:
txMessage.data[0] = SlaveCommand_RequestProperty;
txMessage.data[1] = SlaveProperty_Features;
txMessage.data[1] = SlaveProperty_KeyCount;
txMessage.length = 2;
status = tx(i2cAddress);
*uhkModulePhase = UhkModulePhase_ReceiveModuleFeatures;
*uhkModulePhase = UhkModulePhase_ReceiveModuleKeyCount;
break;
case UhkModulePhase_ReceiveModuleFeatures:
case UhkModulePhase_ReceiveModuleKeyCount:
status = rx(rxMessage, i2cAddress);
*uhkModulePhase = UhkModulePhase_ProcessModuleFeatures;
*uhkModulePhase = UhkModulePhase_ProcessModuleKeyCount;
break;
case UhkModulePhase_ProcessModuleFeatures: {
case UhkModulePhase_ProcessModuleKeyCount: {
bool isMessageValid = CRC16_IsMessageValid(rxMessage);
if (isMessageValid) {
memcpy(&uhkModuleState->features, rxMessage->data, sizeof(uhk_module_features_t));
uhkModuleState->keyCount = rxMessage->data[0];
}
status = kStatus_Uhk_NoTransfer;
*uhkModulePhase = isMessageValid ? UhkModulePhase_RequestKeyStates : UhkModulePhase_RequestModuleFeatures;
status = kStatus_Uhk_IdleCycle;
*uhkModulePhase = isMessageValid ? UhkModulePhase_RequestModulePointerCount : UhkModulePhase_RequestModuleKeyCount;
break;
}
// Get module pointer count
case UhkModulePhase_RequestModulePointerCount:
txMessage.data[0] = SlaveCommand_RequestProperty;
txMessage.data[1] = SlaveProperty_PointerCount;
txMessage.length = 2;
status = tx(i2cAddress);
*uhkModulePhase = UhkModulePhase_ReceiveModulePointerCount;
break;
case UhkModulePhase_ReceiveModulePointerCount:
status = rx(rxMessage, i2cAddress);
*uhkModulePhase = UhkModulePhase_ProcessModulePointerCount;
break;
case UhkModulePhase_ProcessModulePointerCount: {
bool isMessageValid = CRC16_IsMessageValid(rxMessage);
if (isMessageValid) {
uhkModuleState->pointerCount = rxMessage->data[0];
}
status = kStatus_Uhk_IdleCycle;
*uhkModulePhase = isMessageValid ? UhkModulePhase_RequestKeyStates : UhkModulePhase_RequestModulePointerCount;
break;
}
@@ -178,19 +222,19 @@ status_t UhkModuleSlaveDriver_Update(uint8_t uhkModuleDriverId)
case UhkModulePhase_ProcessKeystates:
if (CRC16_IsMessageValid(rxMessage)) {
uint8_t slotId = uhkModuleDriverId + 1;
BoolBitsToBytes(rxMessage->data, keyStatesBuffer, uhkModuleState->features.keyCount);
for (uint8_t keyId=0; keyId<uhkModuleState->features.keyCount; keyId++) {
BoolBitsToBytes(rxMessage->data, keyStatesBuffer, uhkModuleState->keyCount);
for (uint8_t keyId=0; keyId<uhkModuleState->keyCount; keyId++) {
KeyStates[slotId][keyId].current = keyStatesBuffer[keyId];
}
}
status = kStatus_Uhk_NoTransfer;
status = kStatus_Uhk_IdleCycle;
*uhkModulePhase = UhkModulePhase_SetTestLed;
break;
// Set test LED
case UhkModulePhase_SetTestLed:
if (uhkModuleSourceVars->isTestLedOn == uhkModuleTargetVars->isTestLedOn) {
status = kStatus_Uhk_NoTransfer;
status = kStatus_Uhk_IdleCycle;
} else {
txMessage.data[0] = SlaveCommand_SetTestLed;
txMessage.data[1] = uhkModuleSourceVars->isTestLedOn;
@@ -204,7 +248,7 @@ status_t UhkModuleSlaveDriver_Update(uint8_t uhkModuleDriverId)
// Set PWM brightness
case UhkModulePhase_SetLedPwmBrightness:
if (uhkModuleSourceVars->ledPwmBrightness == uhkModuleTargetVars->ledPwmBrightness) {
status = kStatus_Uhk_NoTransfer;
status = kStatus_Uhk_IdleCycle;
} else {
txMessage.data[0] = SlaveCommand_SetLedPwmBrightness;
txMessage.data[1] = uhkModuleSourceVars->ledPwmBrightness;
@@ -221,8 +265,10 @@ status_t UhkModuleSlaveDriver_Update(uint8_t uhkModuleDriverId)
void UhkModuleSlaveDriver_Disconnect(uint8_t uhkModuleDriverId)
{
#ifdef LED_DRIVERS_ENABLED
if (uhkModuleDriverId == SlaveId_LeftKeyboardHalf) {
Slaves[SlaveId_LeftLedDriver].isConnected = false;
}
UhkModuleStates[uhkModuleDriverId].moduleId = 0;
#endif
}

View File

@@ -5,6 +5,7 @@
#include "fsl_common.h"
#include "crc16.h"
#include "versions.h"
// Macros:
@@ -29,19 +30,29 @@
UhkModulePhase_ProcessSync,
// Get protocol version
UhkModulePhase_RequestProtocolVersion,
UhkModulePhase_ReceiveProtocolVersion,
UhkModulePhase_ProcessProtocolVersion,
UhkModulePhase_RequestModuleProtocolVersion,
UhkModulePhase_ReceiveModuleProtocolVersion,
UhkModulePhase_ProcessModuleProtocolVersion,
// Get firmware version
UhkModulePhase_RequestFirmwareVersion,
UhkModulePhase_ReceiveFirmwareVersion,
UhkModulePhase_ProcessFirmwareVersion,
// Get module id
UhkModulePhase_RequestModuleId,
UhkModulePhase_ReceiveModuleId,
UhkModulePhase_ProcessModuleId,
// Get module features
UhkModulePhase_RequestModuleFeatures,
UhkModulePhase_ReceiveModuleFeatures,
UhkModulePhase_ProcessModuleFeatures,
// Get module key count
UhkModulePhase_RequestModuleKeyCount,
UhkModulePhase_ReceiveModuleKeyCount,
UhkModulePhase_ProcessModuleKeyCount,
// Get module key count
UhkModulePhase_RequestModulePointerCount,
UhkModulePhase_ReceiveModulePointerCount,
UhkModulePhase_ProcessModulePointerCount,
// Get key states
UhkModulePhase_RequestKeyStates,
@@ -62,14 +73,16 @@
typedef struct {
uint8_t moduleId;
uint8_t protocolVersion;
version_t moduleProtocolVersion;
version_t firmwareVersion;
uhk_module_phase_t phase;
uhk_module_vars_t sourceVars;
uhk_module_vars_t targetVars;
i2c_message_t rxMessage;
uint8_t firmwareI2cAddress;
uint8_t bootloaderI2cAddress;
uhk_module_features_t features;
uint8_t keyCount;
uint8_t pointerCount;
} uhk_module_state_t;
typedef struct {

View File

@@ -6,6 +6,8 @@
#include "slave_drivers/kboot_driver.h"
#include "i2c.h"
#include "i2c_addresses.h"
#include "config.h"
#include "i2c_error_logger.h"
uint32_t I2cSlaveScheduler_Counter;
@@ -29,6 +31,7 @@ uhk_slave_t Slaves[] = {
.update = UhkModuleSlaveDriver_Update,
.perDriverId = UhkModuleDriverId_RightAddon,
},
#ifdef LED_DRIVERS_ENABLED
{
.init = LedSlaveDriver_Init,
.update = LedSlaveDriver_Update,
@@ -39,6 +42,7 @@ uhk_slave_t Slaves[] = {
.update = LedSlaveDriver_Update,
.perDriverId = LedDriverId_Left,
},
#endif
{
.init = KbootSlaveDriver_Init,
.update = KbootSlaveDriver_Update,
@@ -48,23 +52,27 @@ uhk_slave_t Slaves[] = {
static void slaveSchedulerCallback(I2C_Type *base, i2c_master_handle_t *handle, status_t previousStatus, void *userData)
{
bool isFirstIteration = true;
bool isFirstCycle = true;
bool isTransferScheduled = false;
I2cSlaveScheduler_Counter++;
do {
uhk_slave_t *previousSlave = Slaves + previousSlaveId;
uhk_slave_t *currentSlave = Slaves + currentSlaveId;
if (isFirstCycle) {
uhk_slave_t *previousSlave = Slaves + previousSlaveId;
previousSlave->previousStatus = previousStatus;
if (IS_STATUS_I2C_ERROR(previousStatus)) {
LogI2cError(previousSlaveId, previousStatus);
}
if (isFirstIteration) {
bool wasPreviousSlaveConnected = previousSlave->isConnected;
previousSlave->isConnected = previousStatus == kStatus_Success;
if (wasPreviousSlaveConnected && !previousSlave->isConnected && previousSlave->disconnect) {
previousSlave->disconnect(previousSlaveId);
}
isFirstIteration = false;
isFirstCycle = false;
}
if (!currentSlave->isConnected) {
@@ -72,18 +80,21 @@ static void slaveSchedulerCallback(I2C_Type *base, i2c_master_handle_t *handle,
}
status_t currentStatus = currentSlave->update(currentSlave->perDriverId);
isTransferScheduled = currentStatus != kStatus_Uhk_IdleSlave && currentStatus != kStatus_Uhk_NoTransfer;
if (IS_STATUS_I2C_ERROR(currentStatus)) {
LogI2cError(currentSlaveId, currentStatus);
}
isTransferScheduled = currentStatus != kStatus_Uhk_IdleSlave && currentStatus != kStatus_Uhk_IdleCycle;
if (isTransferScheduled) {
currentSlave->isConnected = true;
}
if (currentStatus != kStatus_Uhk_NoTransfer) {
if (currentStatus != kStatus_Uhk_IdleCycle) {
previousSlaveId = currentSlaveId++;
}
if (currentSlaveId >= (sizeof(Slaves) / sizeof(uhk_slave_t))) {
if (currentSlaveId >= SLAVE_COUNT) {
currentSlaveId = 0;
}
}
} while (!isTransferScheduled);
}
@@ -92,7 +103,7 @@ void InitSlaveScheduler(void)
previousSlaveId = 0;
currentSlaveId = 0;
for (uint8_t i=0; i<sizeof(Slaves) / sizeof(uhk_slave_t); i++) {
for (uint8_t i=0; i<SLAVE_COUNT; i++) {
uhk_slave_t *currentSlave = Slaves + i;
currentSlave->isConnected = false;
}

View File

@@ -4,6 +4,14 @@
// Includes:
#include "fsl_common.h"
#include "config.h"
// Macros:
#define SLAVE_COUNT (sizeof(Slaves) / sizeof(uhk_slave_t))
#define MAX_SLAVE_COUNT 6
#define IS_VALID_SLAVE_ID(slaveId) (0 <= slaveId && slaveId <= MAX_SLAVE_COUNT)
#define IS_STATUS_I2C_ERROR(status) (kStatus_I2C_Busy <= status && status <= kStatus_I2C_Timeout)
// Typedefs:
@@ -11,8 +19,10 @@
SlaveId_LeftKeyboardHalf,
SlaveId_LeftAddon,
SlaveId_RightAddon,
#ifdef LED_DRIVERS_ENABLED
SlaveId_RightLedDriver,
SlaveId_LeftLedDriver,
#endif
SlaveId_KbootDriver,
} slave_id_t;
@@ -30,12 +40,12 @@
} uhk_slave_t;
typedef enum {
kStatusGroup_Uhk = -1,
kStatusGroup_Uhk = 200,
} uhk_status_group_t;
typedef enum {
kStatus_Uhk_IdleSlave = MAKE_STATUS(kStatusGroup_Uhk, 0), // Another slave should be scheduled
kStatus_Uhk_NoTransfer = MAKE_STATUS(kStatusGroup_Uhk, 1), // The same slave should be rescheduled
kStatus_Uhk_IdleCycle = MAKE_STATUS(kStatusGroup_Uhk, 1), // The same slave should be rescheduled
} uhk_status_t;
// Variables:

View File

@@ -13,7 +13,7 @@
// Macros:
#define SLOT_COUNT 4
#define IS_VALID_SLAVE_SLOT(slotId) (SlotId_LeftKeyboardHalf <= (slotId) && (slotId) <= SlotId_RightModule)
#define IS_VALID_MODULE_SLOT(slotId) (SlotId_LeftKeyboardHalf <= (slotId) && (slotId) <= SlotId_RightModule)
// Typedefs:

View File

@@ -1,8 +1,13 @@
#include "fsl_common.h"
#include "usb_commands/usb_command_get_property.h"
#include "usb_commands/usb_command_get_device_property.h"
#include "usb_protocol_handler.h"
#include "eeprom.h"
#include "versions.h"
#include "slave_drivers/kboot_driver.h"
#include "i2c.h"
#include "init_peripherals.h"
#include "fsl_i2c.h"
#include "timer.h"
version_t deviceProtocolVersion = {
DEVICE_PROTOCOL_MAJOR_VERSION,
@@ -41,7 +46,7 @@ version_t protocolVersions[] =
uint16_t configSizes[] = {HARDWARE_CONFIG_SIZE, USER_CONFIG_SIZE};
void UsbCommand_GetProperty(void)
void UsbCommand_GetDeviceProperty(void)
{
uint8_t propertyId = GetUsbRxBufferUint8(1);
@@ -55,8 +60,19 @@ void UsbCommand_GetProperty(void)
case DevicePropertyId_ConfigSizes:
memcpy(GenericHidOutBuffer+1, (uint8_t*)&configSizes, sizeof(configSizes));
break;
case DevicePropertyId_CurrentKbootCommand:
GenericHidOutBuffer[1] = KbootDriverState.command;
break;
case DevicePropertyId_I2cMainBusBaudRate:
GenericHidOutBuffer[1] = I2C_MAIN_BUS_BASEADDR->F;
SetUsbTxBufferUint32(2, I2cMainBusRequestedBaudRateBps);
SetUsbTxBufferUint32(6, I2cMainBusActualBaudRateBps);
break;
case DevicePropertyId_Uptime:
SetUsbTxBufferUint32(1, CurrentTime);
break;
default:
SetUsbTxBufferUint8(0, UsbStatusCode_GetProperty_InvalidProperty);
SetUsbTxBufferUint8(0, UsbStatusCode_GetDeviceProperty_InvalidProperty);
break;
}
}

View File

@@ -0,0 +1,23 @@
#ifndef __USB_COMMAND_GET_DEVICE_PROPERTY_H__
#define __USB_COMMAND_GET_DEVICE_PROPERTY_H__
// Typedefs:
typedef enum {
DevicePropertyId_DeviceProtocolVersion = 0,
DevicePropertyId_ProtocolVersions = 1,
DevicePropertyId_ConfigSizes = 2,
DevicePropertyId_CurrentKbootCommand = 3,
DevicePropertyId_I2cMainBusBaudRate = 4,
DevicePropertyId_Uptime = 5,
} device_property_t;
typedef enum {
UsbStatusCode_GetDeviceProperty_InvalidProperty = 2,
} usb_status_code_get_device_property_t;
// Functions:
void UsbCommand_GetDeviceProperty(void);
#endif

View File

@@ -1,5 +1,5 @@
#include "fsl_common.h"
#include "usb_commands/usb_command_get_keyboard_state.h"
#include "usb_commands/usb_command_get_device_state.h"
#include "usb_protocol_handler.h"
#include "eeprom.h"
#include "peripherals/merge_sensor.h"

View File

@@ -0,0 +1,26 @@
#include "fsl_common.h"
#include "usb_commands/usb_command_get_module_property.h"
#include "usb_protocol_handler.h"
#include "slot.h"
#include "slave_drivers/uhk_module_driver.h"
void UsbCommand_GetModuleProperty()
{
slot_t slotId = GetUsbRxBufferUint8(1);
if (!IS_VALID_MODULE_SLOT(slotId)) {
SetUsbTxBufferUint8(0, UsbStatusCode_GetModuleProperty_InvalidModuleSlotId);
}
module_property_id_t modulePropertyId = GetUsbRxBufferUint8(2);
switch (modulePropertyId) {
case ModulePropertyId_VersionNumbers: {
uint8_t moduleDriverId = SLOT_ID_TO_UHK_MODULE_DRIVER_ID(slotId);
uhk_module_state_t *moduleState = UhkModuleStates + moduleDriverId;
GenericHidOutBuffer[1] = moduleState->moduleId;
memcpy(GenericHidOutBuffer + 2, &moduleState->moduleProtocolVersion, sizeof(version_t));
memcpy(GenericHidOutBuffer + 8, &moduleState->firmwareVersion, sizeof(version_t));
break;
}
}
}

View File

@@ -0,0 +1,18 @@
#ifndef __USB_COMMAND_GET_MODULE_PROPERTY_H__
#define __USB_COMMAND_GET_MODULE_PROPERTY_H__
// Functions:
void UsbCommand_GetModuleProperty();
// Typedefs:
typedef enum {
ModulePropertyId_VersionNumbers = 0,
} module_property_id_t;
typedef enum {
UsbStatusCode_GetModuleProperty_InvalidModuleSlotId = 2,
} usb_status_code_get_module_property_t;
#endif

View File

@@ -1,20 +0,0 @@
#ifndef __USB_COMMAND_GET_PROPERTY_H__
#define __USB_COMMAND_GET_PROPERTY_H__
// Typedefs:
typedef enum {
DevicePropertyId_DeviceProtocolVersion = 0,
DevicePropertyId_ProtocolVersions = 1,
DevicePropertyId_ConfigSizes = 2,
} system_property_t;
typedef enum {
UsbStatusCode_GetProperty_InvalidProperty = 2,
} usb_status_code_get_property_t;
// Functions:
void UsbCommand_GetProperty(void);
#endif

View File

@@ -0,0 +1,19 @@
#include "fsl_common.h"
#include "usb_commands/usb_command_get_slave_i2c_errors.h"
#include "usb_protocol_handler.h"
#include "slave_scheduler.h"
#include "i2c_error_logger.h"
void UsbCommand_GetSlaveI2cErrors()
{
uint8_t slaveId = GetUsbRxBufferUint8(1);
if (!IS_VALID_SLAVE_ID(slaveId)) {
SetUsbTxBufferUint8(0, UsbStatusCode_GetModuleProperty_InvalidSlaveId);
}
i2c_slave_error_counter_t *i2cSlaveErrorCounter = I2cSlaveErrorCounters + slaveId;
GenericHidOutBuffer[1] = i2cSlaveErrorCounter->errorTypeCount;
memcpy(GenericHidOutBuffer + 2, i2cSlaveErrorCounter->errors, sizeof(i2c_error_count_t) * MAX_LOGGED_I2C_ERROR_TYPES_PER_SLAVE);
}

View File

@@ -0,0 +1,14 @@
#ifndef __USB_COMMAND_GET_SLAVE_I2C_ERRORS_H__
#define __USB_COMMAND_GET_SLAVE_I2C_ERRORS_H__
// Functions:
void UsbCommand_GetSlaveI2cErrors();
// Typedefs:
typedef enum {
UsbStatusCode_GetModuleProperty_InvalidSlaveId = 2,
} usb_status_code_get_slave_i2c_errors_t;
#endif

View File

@@ -7,7 +7,7 @@ void UsbCommand_JumpToModuleBootloader(void)
{
uint8_t slotId = GetUsbRxBufferUint8(1);
if (!IS_VALID_SLAVE_SLOT(slotId)) {
if (!IS_VALID_MODULE_SLOT(slotId)) {
SetUsbTxBufferUint8(0, UsbStatusCode_JumpToModuleBootloader_InvalidSlaveSlotId);
return;
}

View File

@@ -6,5 +6,5 @@ void UsbCommand_SendKbootCommandToModule(void)
{
KbootDriverState.phase = 0;
KbootDriverState.i2cAddress = GetUsbRxBufferUint8(2);
KbootDriverState.commandType = GetUsbRxBufferUint8(1); // Command should be set last.
KbootDriverState.command = GetUsbRxBufferUint8(1); // Command should be set last.
}

View File

@@ -0,0 +1,11 @@
#include "usb_protocol_handler.h"
#include "usb_commands/usb_command_set_i2c_baud_rate.h"
#include "init_peripherals.h"
#include "fsl_i2c.h"
void UsbCommand_SetI2cBaudRate(void)
{
uint32_t i2cBaudRate = GetUsbRxBufferUint32(1);
I2cMainBusRequestedBaudRateBps = i2cBaudRate;
ReinitI2cMainBus();
}

View File

@@ -0,0 +1,8 @@
#ifndef __USB_COMMAND_SET_I2C_BAUD_RATE__
#define __USB_COMMAND_SET_I2C_BAUD_RATE__
// Functions:
void UsbCommand_SetI2cBaudRate(void);
#endif

View File

@@ -1,6 +1,7 @@
#include "usb_protocol_handler.h"
#include "buffer.h"
#include "usb_commands/usb_command_get_property.h"
#include "usb_commands/usb_command_get_device_property.h"
#include "usb_commands/usb_command_get_module_property.h"
#include "usb_commands/usb_command_reenumerate.h"
#include "usb_commands/usb_command_set_test_led.h"
#include "usb_commands/usb_command_write_config.h"
@@ -9,18 +10,20 @@
#include "usb_commands/usb_command_get_adc_value.h"
#include "usb_commands/usb_command_launch_eeprom_transfer.h"
#include "usb_commands/usb_command_read_config.h"
#include "usb_commands/usb_command_get_keyboard_state.h"
#include "usb_commands/usb_command_get_device_state.h"
#include "usb_commands/usb_command_get_debug_buffer.h"
#include "usb_commands/usb_command_jump_to_module_bootloader.h"
#include "usb_commands/usb_command_send_kboot_command_to_module.h"
#include "usb_commands/usb_command_get_slave_i2c_errors.h"
#include "usb_commands/usb_command_set_i2c_baud_rate.h"
void UsbProtocolHandler(void)
{
bzero(GenericHidOutBuffer, USB_GENERIC_HID_OUT_BUFFER_LENGTH);
uint8_t command = GetUsbRxBufferUint8(0);
switch (command) {
case UsbCommandId_GetProperty:
UsbCommand_GetProperty();
case UsbCommandId_GetDeviceProperty:
UsbCommand_GetDeviceProperty();
break;
case UsbCommandId_Reenumerate:
UsbCommand_Reenumerate();
@@ -61,6 +64,15 @@ void UsbProtocolHandler(void)
case UsbCommandId_SetLedPwmBrightness:
UsbCommand_SetLedPwmBrightness();
break;
case UsbCommandId_GetModuleProperty:
UsbCommand_GetModuleProperty();
break;
case UsbCommandId_GetSlaveI2cErrors:
UsbCommand_GetSlaveI2cErrors();
break;
case UsbCommandId_SetI2cBaudRate:
UsbCommand_SetI2cBaudRate();
break;
default:
SetUsbTxBufferUint8(0, UsbStatusCode_InvalidCommand);
break;

View File

@@ -13,7 +13,7 @@
// Typedefs:
typedef enum {
UsbCommandId_GetProperty = 0x00,
UsbCommandId_GetDeviceProperty = 0x00,
UsbCommandId_Reenumerate = 0x01,
UsbCommandId_JumpToModuleBootloader = 0x02,
@@ -30,6 +30,9 @@
UsbCommandId_GetDebugBuffer = 0x0b,
UsbCommandId_GetAdcValue = 0x0c,
UsbCommandId_SetLedPwmBrightness = 0x0d,
UsbCommandId_GetModuleProperty = 0x0e,
UsbCommandId_GetSlaveI2cErrors = 0x0f,
UsbCommandId_SetI2cBaudRate = 0x10,
} usb_command_id_t;
typedef enum {

View File

@@ -15,9 +15,9 @@
"commander": "^2.11.0",
"shelljs": "^0.7.8"
},
"firmwareVersion": "7.0.0",
"deviceProtocolVersion": "4.0.0",
"moduleProtocolVersion": "3.0.0",
"firmwareVersion": "8.1.0",
"deviceProtocolVersion": "4.2.0",
"moduleProtocolVersion": "4.0.0",
"userConfigVersion": "4.0.0",
"hardwareConfigVersion": "1.0.0",
"devices": [

View File

@@ -27,9 +27,11 @@
typedef enum {
SlaveProperty_Sync,
SlaveProperty_ProtocolVersion,
SlaveProperty_ModuleProtocolVersion,
SlaveProperty_FirmwareVersion,
SlaveProperty_ModuleId,
SlaveProperty_Features,
SlaveProperty_KeyCount,
SlaveProperty_PointerCount,
} slave_property_t;
typedef enum {
@@ -40,11 +42,6 @@
ModuleId_TouchpadRight = 5,
} module_id_t;
typedef struct {
uint8_t keyCount;
bool hasPointer;
} uhk_module_features_t;
typedef struct {
uint8_t length;
uint16_t crc;

View File

@@ -18,15 +18,15 @@
// Variables:
#define FIRMWARE_MAJOR_VERSION 6
#define FIRMWARE_MINOR_VERSION 0
#define FIRMWARE_MAJOR_VERSION 8
#define FIRMWARE_MINOR_VERSION 1
#define FIRMWARE_PATCH_VERSION 0
#define DEVICE_PROTOCOL_MAJOR_VERSION 3
#define DEVICE_PROTOCOL_MINOR_VERSION 0
#define DEVICE_PROTOCOL_MAJOR_VERSION 4
#define DEVICE_PROTOCOL_MINOR_VERSION 2
#define DEVICE_PROTOCOL_PATCH_VERSION 0
#define MODULE_PROTOCOL_MAJOR_VERSION 3
#define MODULE_PROTOCOL_MAJOR_VERSION 4
#define MODULE_PROTOCOL_MINOR_VERSION 0
#define MODULE_PROTOCOL_PATCH_VERSION 0