Bump firmware version to 8.3.0, update changelog and package.json

CHANGELOG.md

@@ -5,6 +5,19 @@ All notable changes to this project will be documented in this file.
 The format is loosely based on [Keep a Changelog](http://keepachangelog.com/en/1.0.0/)
 and this project adheres to the [UHK Versioning](VERSIONING.md) conventions.
 
+## [8.3.0] - 2018-06-03
+
+Device Protocol: 4.3.1 | Module Protocol: 4.0.0 | User Config: 4.**1.0** | Hardware Config: 1.0.0
+
+- Make the config parser handle switch layer actions with hold on double tap disabled. `USERCONFIG:MINOR`
+- Set key debounce timeout from 80ms to 100ms. This should further reduce key chattering.
+
+## [8.2.5] - 2018-05-27
+
+Device Protocol: 4.3.1 | Module Protocol: 4.0.0 | User Config: 4.0.1 | Hardware Config: 1.0.0
+
+- Now really fix the bug that made the hardware and user configuration not load from the EEPROM on some hosts right after firmware update.
+
 ## [8.2.4] - 2018-05-21
 
 Device Protocol: 4.3.**1** | Module Protocol: 4.0.0 | User Config: 4.0.1 | Hardware Config: 1.0.0

right/src/config_parser/parse_keymap.c

@@ -48,7 +48,7 @@ static parser_error_t parseKeyStrokeAction(key_action_t *keyAction, uint8_t keyS
 static parser_error_t parseSwitchLayerAction(key_action_t *KeyAction, config_buffer_t *buffer)
 {
     uint8_t layer = ReadUInt8(buffer) + 1;
-    uint8_t mode = ReadBool(buffer) ? SwitchLayerMode_Toggle : SwitchLayerMode_HoldAndDoubleTapToggle;
+    uint8_t mode = ReadUInt8(buffer);
 
     KeyAction->type = KeyActionType_SwitchLayer;
     KeyAction->switchLayer.layer = layer;

right/src/i2c.h

@@ -35,10 +35,12 @@
     #define I2C_EEPROM_BUS_BAUD_RATE 1000000  // 1 Mhz is the maximum speed of the EEPROM.
     #define I2C_EEPROM_BUS_MUX       kPORT_MuxAlt2
 
+    #define I2C_EEPROM_BUS_SDA_GPIO  GPIOC
     #define I2C_EEPROM_BUS_SDA_PORT  PORTC
     #define I2C_EEPROM_BUS_SDA_CLOCK kCLOCK_PortC
     #define I2C_EEPROM_BUS_SDA_PIN   11
 
+    #define I2C_EEPROM_BUS_SCL_GPIO  GPIOC
     #define I2C_EEPROM_BUS_SCL_PORT  PORTC
     #define I2C_EEPROM_BUS_SCL_CLOCK kCLOCK_PortC
     #define I2C_EEPROM_BUS_SCL_PIN   10

right/src/init_peripherals.c

@@ -21,6 +21,38 @@ bool IsBusPalOn;
 volatile uint32_t I2cMainBusRequestedBaudRateBps = I2C_MAIN_BUS_NORMAL_BAUD_RATE;
 volatile uint32_t I2cMainBusActualBaudRateBps;
 
+static i2c_bus_t i2cMainBus = {
+    .baseAddr = I2C_MAIN_BUS_BASEADDR,
+    .clockSrc = I2C_MAIN_BUS_CLK_SRC,
+    .mux = I2C_MAIN_BUS_MUX,
+
+    .sdaClock = I2C_MAIN_BUS_SDA_CLOCK,
+    .sdaGpio = I2C_MAIN_BUS_SDA_GPIO,
+    .sdaPort = I2C_MAIN_BUS_SDA_PORT,
+    .sdaPin = I2C_MAIN_BUS_SDA_PIN,
+
+    .sclClock = I2C_MAIN_BUS_SCL_CLOCK,
+    .sclGpio = I2C_MAIN_BUS_SCL_GPIO,
+    .sclPort = I2C_MAIN_BUS_SCL_PORT,
+    .sclPin = I2C_MAIN_BUS_SCL_PIN,
+};
+
+static i2c_bus_t i2cEepromBus = {
+    .baseAddr = I2C_EEPROM_BUS_BASEADDR,
+    .clockSrc = I2C_EEPROM_BUS_CLK_SRC,
+    .mux = I2C_EEPROM_BUS_MUX,
+
+    .sdaClock = I2C_EEPROM_BUS_SDA_CLOCK,
+    .sdaGpio = I2C_EEPROM_BUS_SDA_GPIO,
+    .sdaPort = I2C_EEPROM_BUS_SDA_PORT,
+    .sdaPin = I2C_EEPROM_BUS_SDA_PIN,
+
+    .sclClock = I2C_EEPROM_BUS_SCL_CLOCK,
+    .sclGpio = I2C_EEPROM_BUS_SCL_GPIO,
+    .sclPort = I2C_EEPROM_BUS_SCL_PORT,
+    .sclPin = I2C_EEPROM_BUS_SCL_PIN,
+};
+
 static void initBusPalState(void) {
     IsBusPalOn = Wormhole.magicNumber == WORMHOLE_MAGIC_NUMBER && Wormhole.enumerationMode == EnumerationMode_BusPal;
     if (IsBusPalOn) {
@@ -32,12 +64,12 @@ static void initBusPalState(void) {
 static void initInterruptPriorities(void)
 {
     NVIC_SetPriority(PIT_I2C_WATCHDOG_IRQ_ID,  1);
-    NVIC_SetPriority(PIT_TIMER_IRQ_ID,         2);
-    NVIC_SetPriority(I2C_EEPROM_BUS_IRQ_ID,    2);
-    NVIC_SetPriority(PIT_KEY_SCANNER_IRQ_ID,   3);
-    NVIC_SetPriority(PIT_KEY_DEBOUNCER_IRQ_ID, 3);
-    NVIC_SetPriority(I2C_MAIN_BUS_IRQ_ID,      3);
-    NVIC_SetPriority(USB_IRQ_ID,               3);
+    NVIC_SetPriority(I2C_EEPROM_BUS_IRQ_ID,    0);
+    NVIC_SetPriority(PIT_TIMER_IRQ_ID,         3);
+    NVIC_SetPriority(PIT_KEY_SCANNER_IRQ_ID,   4);
+    NVIC_SetPriority(PIT_KEY_DEBOUNCER_IRQ_ID, 4);
+    NVIC_SetPriority(I2C_MAIN_BUS_IRQ_ID,      4);
+    NVIC_SetPriority(USB_IRQ_ID,               4);
 }
 
 static void delay(void)
@@ -45,91 +77,73 @@ static void delay(void)
     for (volatile uint32_t i=0; i<62; i++);
 }
 
-static void recoverI2c(void)
+static void recoverI2cBus(i2c_bus_t *i2cBus)
 {
-    PORT_SetPinMux(I2C_MAIN_BUS_SDA_PORT, I2C_MAIN_BUS_SDA_PIN, kPORT_MuxAsGpio);
-    PORT_SetPinMux(I2C_MAIN_BUS_SCL_PORT, I2C_MAIN_BUS_SCL_PIN, kPORT_MuxAsGpio);
-    GPIO_PinInit(I2C_MAIN_BUS_SCL_GPIO, I2C_MAIN_BUS_SCL_PIN, &(gpio_pin_config_t){kGPIO_DigitalOutput, 1});
+    PORT_SetPinMux(i2cBus->sdaPort, i2cBus->sdaPin, kPORT_MuxAsGpio);
+    PORT_SetPinMux(i2cBus->sclPort, i2cBus->sclPin, kPORT_MuxAsGpio);
+    GPIO_PinInit(i2cBus->sclGpio, i2cBus->sclPin, &(gpio_pin_config_t){kGPIO_DigitalOutput, 1});
 
     bool isOn = true;
     for (int i=0; i<20; i++) {
-        GPIO_PinInit(I2C_MAIN_BUS_SDA_GPIO, I2C_MAIN_BUS_SDA_PIN, &(gpio_pin_config_t){kGPIO_DigitalInput});
-        bool isSdaHigh = GPIO_ReadPinInput(I2C_MAIN_BUS_SDA_GPIO, I2C_MAIN_BUS_SDA_PIN);
-        GPIO_PinInit(I2C_MAIN_BUS_SDA_GPIO, I2C_MAIN_BUS_SDA_PIN, &(gpio_pin_config_t){kGPIO_DigitalOutput, 1});
+        GPIO_PinInit(i2cBus->sdaGpio, i2cBus->sdaPin, &(gpio_pin_config_t){kGPIO_DigitalInput});
+        bool isSdaHigh = GPIO_ReadPinInput(i2cBus->sdaGpio, i2cBus->sdaPin);
+        GPIO_PinInit(i2cBus->sdaGpio, i2cBus->sdaPin, &(gpio_pin_config_t){kGPIO_DigitalOutput, 1});
 
         if (isSdaHigh) {
             return;
         }
 
-        GPIO_WritePinOutput(I2C_MAIN_BUS_SCL_GPIO, I2C_MAIN_BUS_SCL_PIN, isOn);
+        GPIO_WritePinOutput(i2cBus->sclGpio, i2cBus->sclPin, isOn);
         delay();
         isOn = !isOn;
     }
 
-    GPIO_WritePinOutput(I2C_MAIN_BUS_SDA_GPIO, I2C_MAIN_BUS_SDA_PIN, 0);
+    GPIO_WritePinOutput(i2cBus->sdaGpio, i2cBus->sdaPin, 0);
     delay();
-    GPIO_WritePinOutput(I2C_MAIN_BUS_SCL_GPIO, I2C_MAIN_BUS_SCL_PIN, 1);
+    GPIO_WritePinOutput(i2cBus->sclGpio, i2cBus->sclPin, 1);
     delay();
-    GPIO_WritePinOutput(I2C_MAIN_BUS_SDA_GPIO, I2C_MAIN_BUS_SDA_PIN, 1);
+    GPIO_WritePinOutput(i2cBus->sdaGpio, i2cBus->sdaPin, 1);
     delay();
 }
 
-static void initI2cMainBus(void)
+static void initI2cBus(i2c_bus_t *i2cBus)
 {
-    CLOCK_EnableClock(I2C_MAIN_BUS_SDA_CLOCK);
-    CLOCK_EnableClock(I2C_MAIN_BUS_SCL_CLOCK);
+    CLOCK_EnableClock(i2cBus->sdaClock);
+    CLOCK_EnableClock(i2cBus->sclClock);
 
-    recoverI2c();
+    recoverI2cBus(i2cBus);
 
     port_pin_config_t pinConfig = {
         .pullSelect = kPORT_PullUp,
         .openDrainEnable = kPORT_OpenDrainEnable,
-        .mux = I2C_MAIN_BUS_MUX,
+        .mux = i2cBus->mux,
     };
 
-    PORT_SetPinConfig(I2C_MAIN_BUS_SDA_PORT, I2C_MAIN_BUS_SDA_PIN, &pinConfig);
-    PORT_SetPinConfig(I2C_MAIN_BUS_SCL_PORT, I2C_MAIN_BUS_SCL_PIN, &pinConfig);
+    PORT_SetPinConfig(i2cBus->sdaPort, i2cBus->sdaPin, &pinConfig);
+    PORT_SetPinConfig(i2cBus->sclPort, i2cBus->sclPin, &pinConfig);
 
     i2c_master_config_t masterConfig;
     I2C_MasterGetDefaultConfig(&masterConfig);
-    masterConfig.baudRate_Bps = I2cMainBusRequestedBaudRateBps;
-    uint32_t sourceClock = CLOCK_GetFreq(I2C_MAIN_BUS_CLK_SRC);
-    I2C_MasterInit(I2C_MAIN_BUS_BASEADDR, &masterConfig, sourceClock);
+    masterConfig.baudRate_Bps = i2cBus == &i2cMainBus ? I2cMainBusRequestedBaudRateBps : I2C_EEPROM_BUS_BAUD_RATE;
+    uint32_t sourceClock = CLOCK_GetFreq(i2cBus->clockSrc);
+    I2C_MasterInit(i2cBus->baseAddr, &masterConfig, sourceClock);
+
+    if (i2cBus == &i2cMainBus) {
         I2cMainBusActualBaudRateBps = I2C_ActualBaudRate;
+    }
 }
 
 void ReinitI2cMainBus(void)
 {
     I2C_MasterDeinit(I2C_MAIN_BUS_BASEADDR);
-    initI2cMainBus();
+    initI2cBus(&i2cMainBus);
     InitSlaveScheduler();
 }
 
-static void initI2cEepromBus(void)
-{
-    port_pin_config_t pinConfig = {
-       .pullSelect = kPORT_PullUp,
-       .openDrainEnable = kPORT_OpenDrainEnable,
-       .mux = I2C_EEPROM_BUS_MUX,
-   };
-
-   CLOCK_EnableClock(I2C_EEPROM_BUS_SDA_CLOCK);
-   CLOCK_EnableClock(I2C_EEPROM_BUS_SCL_CLOCK);
-
-   PORT_SetPinConfig(I2C_EEPROM_BUS_SDA_PORT, I2C_EEPROM_BUS_SDA_PIN, &pinConfig);
-   PORT_SetPinConfig(I2C_EEPROM_BUS_SCL_PORT, I2C_EEPROM_BUS_SCL_PIN, &pinConfig);
-
-   i2c_master_config_t masterConfig;
-   I2C_MasterGetDefaultConfig(&masterConfig);
-   masterConfig.baudRate_Bps = I2C_EEPROM_BUS_BAUD_RATE;
-   uint32_t sourceClock = CLOCK_GetFreq(I2C_EEPROM_BUS_CLK_SRC);
-   I2C_MasterInit(I2C_EEPROM_BUS_BASEADDR, &masterConfig, sourceClock);
-}
-
 static void initI2c(void)
 {
-    initI2cMainBus();
-    initI2cEepromBus();
+    initI2cBus(&i2cMainBus);
+    initI2cBus(&i2cEepromBus);
 }
 
 void InitPeripherals(void)

right/src/init_peripherals.h

@@ -1,10 +1,28 @@
 #ifndef __INIT_PERIPHERALS_H__
 #define __INIT_PERIPHERALS_H__
 
-// Includes
+// Includes:
 
     #include "fsl_common.h"
 
+// Typedefs:
+
+    typedef struct {
+        clock_name_t clockSrc;
+        I2C_Type *baseAddr;
+        uint16_t mux;
+
+        clock_ip_name_t sdaClock;
+        GPIO_Type *sdaGpio;
+        PORT_Type *sdaPort;
+        uint32_t sdaPin;
+
+        clock_ip_name_t sclClock;
+        GPIO_Type *sclGpio;
+        PORT_Type *sclPort;
+        uint32_t sclPin;
+    } i2c_bus_t;
+
 // Variables:
 
     extern bool IsBusPalOn;

right/src/key_action.h

@@ -28,9 +28,9 @@
     } keystroke_type_t;
 
     typedef enum {
-        SwitchLayerMode_Hold,
         SwitchLayerMode_HoldAndDoubleTapToggle,
         SwitchLayerMode_Toggle,
+        SwitchLayerMode_Hold,
     } switch_layer_mode_t;
 
     typedef enum {

right/src/key_debouncer.h

@@ -9,7 +9,7 @@
 // Macros:
 
     #define KEY_DEBOUNCER_INTERVAL_MSEC 1
-    #define KEY_DEBOUNCER_TIMEOUT_MSEC 80
+    #define KEY_DEBOUNCER_TIMEOUT_MSEC 100
 
 // Functions:
 

scripts/package.json

@@ -15,10 +15,10 @@
     "commander": "^2.11.0",
     "shelljs": "^0.7.8"
   },
-  "firmwareVersion": "8.2.4",
+  "firmwareVersion": "8.3.0",
   "deviceProtocolVersion": "4.3.1",
   "moduleProtocolVersion": "4.0.0",
-  "userConfigVersion": "4.0.1",
+  "userConfigVersion": "4.1.0",
   "hardwareConfigVersion": "1.0.0",
   "devices": [
     {

shared/versions.h

@@ -19,8 +19,8 @@
 // Variables:
 
     #define FIRMWARE_MAJOR_VERSION 8
-    #define FIRMWARE_MINOR_VERSION 2
-    #define FIRMWARE_PATCH_VERSION 4
+    #define FIRMWARE_MINOR_VERSION 3
+    #define FIRMWARE_PATCH_VERSION 0
 
     #define DEVICE_PROTOCOL_MAJOR_VERSION 4
     #define DEVICE_PROTOCOL_MINOR_VERSION 3
@@ -31,8 +31,8 @@
     #define MODULE_PROTOCOL_PATCH_VERSION 0
 
     #define USER_CONFIG_MAJOR_VERSION 4
-    #define USER_CONFIG_MINOR_VERSION 0
-    #define USER_CONFIG_PATCH_VERSION 1
+    #define USER_CONFIG_MINOR_VERSION 1
+    #define USER_CONFIG_PATCH_VERSION 0
 
     #define HARDWARE_CONFIG_MAJOR_VERSION 1
     #define HARDWARE_CONFIG_MINOR_VERSION 0