László Monda 880981ac14 Initialize I2C slave mode with I2C_SlaveInit().

2017-02-05 20:55:13 +01:00

..

bridge_protocol_handler.c

Clean up the case BRIDGE_COMMAND_SET_TEST_LED clause of the bridge protocol handler.

2017-01-14 00:35:01 +01:00

bridge_protocol_handler.h

Drive the LED_PWM line of the left half via TPM which doesn't work yet for some reason. Add protocol command for setting the LED_PWM brightness of the left half. Expose UpdateUsbReports()

2017-01-13 21:43:47 +01:00

i2c.h

Make the left keyboard half send the state of the keys to the right half via I2C and make the right half send the relevant scancodes to the host via USB.

2016-10-12 03:03:59 +02:00

init_clock.c

Replace clock_config.[ch] with the much shorter init_clock.[ch]

2016-10-11 02:41:29 +02:00

init_clock.h

Replace clock_config.[ch] with the much shorter init_clock.[ch]

2016-10-11 02:41:29 +02:00

init_peripherials.c

Initialize I2C slave mode with I2C_SlaveInit().

2017-02-05 20:55:13 +01:00

init_peripherials.h

Pull up the SDB of the left LED driver.

2016-10-14 19:04:00 +02:00

led_pwm.c

Make global LED PWM brightness adjustment work by enabling the TPM clock.

2017-01-14 00:30:40 +01:00

led_pwm.h

Drive the LED_PWM line of the left half via TPM which doesn't work yet for some reason. Add protocol command for setting the LED_PWM brightness of the left half. Expose UpdateUsbReports()

2017-01-13 21:43:47 +01:00

main.c

Use >= relations instead of == for comparing UHK_PCB_MAJOR_VERSION.

2017-01-21 02:20:47 +01:00

main.h

Expose ISO jumper state over USB.

2016-10-20 00:14:01 +02:00

test_led.c

Fix TEST_LED_{ON,OFF} macros to function as they should. Enable the test LEDs of both halves by default.

2016-10-15 00:41:37 +02:00

test_led.h

Change test LED pin for the v7 PCB.

2017-01-03 02:29:50 +01:00