László Monda 7013d0421f Apparently, even the 7th generation prototype needs this code block to work for some reason.

2017-03-16 04:18:17 +01:00

..

bridge_protocol_handler.c

Clean up the case BRIDGE_COMMAND_SET_TEST_LED clause of the bridge protocol handler.

2017-01-14 00:35:01 +01:00

bridge_protocol_handler.h

Drive the LED_PWM line of the left half via TPM which doesn't work yet for some reason. Add protocol command for setting the LED_PWM brightness of the left half. Expose UpdateUsbReports()

2017-01-13 21:43:47 +01:00

i2c.h

Make the left keyboard half send the state of the keys to the right half via I2C and make the right half send the relevant scancodes to the host via USB.

2016-10-12 03:03:59 +02:00

init_clock.c

Replace clock_config.[ch] with the much shorter init_clock.[ch]

2016-10-11 02:41:29 +02:00

init_clock.h

Replace clock_config.[ch] with the much shorter init_clock.[ch]

2016-10-11 02:41:29 +02:00

init_peripherials.c

Apparently, even the 7th generation prototype needs this code block to work for some reason.

2017-03-16 04:18:17 +01:00

init_peripherials.h

Pull up the SDB of the left LED driver.

2016-10-14 19:04:00 +02:00

led_pwm.c

Fix numOfChnls by setting it to 1.

2017-03-16 04:11:42 +01:00

led_pwm.h

Drive the LED_PWM line of the left half via TPM which doesn't work yet for some reason. Add protocol command for setting the LED_PWM brightness of the left half. Expose UpdateUsbReports()

2017-01-13 21:43:47 +01:00

main.c

Remove incorrect I2C addressing mode setting that was copied from the buggy KSDK examples. The default addressing mode value is correct.

2017-03-13 01:30:28 +01:00

main.h

Expose ISO jumper state over USB.

2016-10-20 00:14:01 +02:00

test_led.c

Fix TEST_LED_{ON,OFF} macros to function as they should. Enable the test LEDs of both halves by default.

2016-10-15 00:41:37 +02:00

test_led.h

Fix TEST_LED_TOGGLE()

2017-03-12 22:24:44 +01:00