László Monda 50443faa23 Don't blink the test LED anymore for the set PWM command.

2017-01-14 00:32:48 +01:00

..

bridge_protocol_handler.c

Don't blink the test LED anymore for the set PWM command.

2017-01-14 00:32:48 +01:00

bridge_protocol_handler.h

Drive the LED_PWM line of the left half via TPM which doesn't work yet for some reason. Add protocol command for setting the LED_PWM brightness of the left half. Expose UpdateUsbReports()

2017-01-13 21:43:47 +01:00

i2c.h

Make the left keyboard half send the state of the keys to the right half via I2C and make the right half send the relevant scancodes to the host via USB.

2016-10-12 03:03:59 +02:00

init_clock.c

Replace clock_config.[ch] with the much shorter init_clock.[ch]

2016-10-11 02:41:29 +02:00

init_clock.h

Replace clock_config.[ch] with the much shorter init_clock.[ch]

2016-10-11 02:41:29 +02:00

init_peripherials.c

Drive the LED_PWM line of the left half via TPM which doesn't work yet for some reason. Add protocol command for setting the LED_PWM brightness of the left half. Expose UpdateUsbReports()

2017-01-13 21:43:47 +01:00

init_peripherials.h

Pull up the SDB of the left LED driver.

2016-10-14 19:04:00 +02:00

led_pwm.c

Make global LED PWM brightness adjustment work by enabling the TPM clock.

2017-01-14 00:30:40 +01:00

led_pwm.h

Drive the LED_PWM line of the left half via TPM which doesn't work yet for some reason. Add protocol command for setting the LED_PWM brightness of the left half. Expose UpdateUsbReports()

2017-01-13 21:43:47 +01:00

main.c

Remove LED jumper and ISO jumper related code, as the presence of LEDs and ISO/ANSI configuration will be stored in the hardware configuration area of the EEPROM instead of using solder jumpers.

2017-01-05 19:25:39 +01:00

main.h

Expose ISO jumper state over USB.

2016-10-20 00:14:01 +02:00

test_led.c

Fix TEST_LED_{ON,OFF} macros to function as they should. Enable the test LEDs of both halves by default.

2016-10-15 00:41:37 +02:00

test_led.h

Change test LED pin for the v7 PCB.

2017-01-03 02:29:50 +01:00