firmware/right/src/usb_protocol_handler.c

#include "usb_protocol_handler.h"
#include "system_properties.h"
#include "peripherals/test_led.h"
#include "i2c_addresses.h"
#include "peripherals/led_driver.h"
#include "peripherals/merge_sensor.h"
#include "config/parse_config.h"
#include "config/config_state.h"
#include "led_pwm.h"
#include "slave_scheduler.h"
#include "slave_drivers/slave_driver_uhk_module.h"
#include "wormhole.h"
#include "peripherals/adc.h"
#include "eeprom.h"

// Functions for setting error statuses

void setError(uint8_t error) {
    GenericHidOutBuffer[0] = error;
}

void setGenericError(void)
{
    setError(UsbResponse_GenericError);
}

// Set a single byte as the response.
void SetResponseByte(uint8_t response)
{
    GenericHidOutBuffer[1] = response;
}

// Per command protocol command handlers

void getSystemProperty(void) {
    uint8_t propertyId = GenericHidInBuffer[1];

    switch (propertyId) {
        case SystemProperty_UsbProtocolVersionId:
            SetResponseByte(SYSTEM_PROPERTY_USB_PROTOCOL_VERSION);
            break;
        case SystemProperty_BridgeProtocolVersionId:
            SetResponseByte(SYSTEM_PROPERTY_BRIDGE_PROTOCOL_VERSION);
            break;
        case SystemProperty_DataModelVersionId:
            SetResponseByte(SYSTEM_PROPERTY_DATA_MODEL_VERSION);
            break;
        case SystemProperty_FirmwareVersionId:
            SetResponseByte(SYSTEM_PROPERTY_FIRMWARE_VERSION);
            break;
        default:
            setGenericError();
            break;
    }
}

void reenumerate(void) {
    Wormhole.magicNumber = WORMHOLE_MAGIC_NUMBER;
    Wormhole.enumerationMode = GenericHidInBuffer[1];
    SCB->AIRCR = 0x5FA<<SCB_AIRCR_VECTKEY_Pos | SCB_AIRCR_SYSRESETREQ_Msk; // Reset the MCU.
    for (;;);
}

void setTestLed(void)
{
    uint8_t ledState = GenericHidInBuffer[1];
    TEST_LED_SET(ledState);
    UhkModuleStates[0].isTestLedOn = ledState;
}

void writeEeprom(void)
{
    uint8_t i2cPayloadSize = GenericHidInBuffer[1];

    if (i2cPayloadSize > USB_GENERIC_HID_OUT_BUFFER_LENGTH-2) {
        setError(WRITE_EEPROM_RESPONSE_INVALID_PAYLOAD_SIZE);
        return;
    }

//    I2cWrite(I2C_EEPROM_BUS_BASEADDR, I2C_ADDRESS_EEPROM, GenericHidInBuffer+2, i2cPayloadSize);
}

void readEeprom(void)
{
    uint8_t i2cPayloadSize = GenericHidInBuffer[1];

    if (i2cPayloadSize > USB_GENERIC_HID_OUT_BUFFER_LENGTH-1) {
        setError(WRITE_EEPROM_RESPONSE_INVALID_PAYLOAD_SIZE);
        return;
    }

//    I2cWrite(I2C_EEPROM_BUS_BASEADDR, I2C_ADDRESS_EEPROM, GenericHidInBuffer+2, 2);
//    I2cRead(I2C_EEPROM_BUS_BASEADDR, I2C_ADDRESS_EEPROM, GenericHidOutBuffer+1, i2cPayloadSize);

    GenericHidOutBuffer[0] = UsbResponse_Success;
}

void readMergeSensor(void)
{
    SetResponseByte(MERGE_SENSOR_IS_MERGED);
}

void uploadConfig(void)
{
    uint8_t byteCount = GenericHidInBuffer[1];
    uint16_t memoryOffset = *((uint16_t*)(GenericHidInBuffer+2));

    if (byteCount > USB_GENERIC_HID_OUT_BUFFER_LENGTH-4) {
        setError(UPLOAD_CONFIG_INVALID_PAYLOAD_SIZE);
        return;
    }

    memcpy(UserConfigBuffer.buffer+memoryOffset, GenericHidInBuffer+4, byteCount);
}

void applyConfig(void)
{
    UserConfigBuffer.offset = 0;
    GenericHidOutBuffer[0] = ParseConfig(&UserConfigBuffer);
    GenericHidOutBuffer[1] = UserConfigBuffer.offset;
    GenericHidOutBuffer[2] = UserConfigBuffer.offset >> 8;
}

void setLedPwm(void)
{
    uint8_t brightnessPercent = GenericHidInBuffer[1];
    LedPwm_SetBrightness(brightnessPercent);
    UhkModuleStates[0].ledPwmBrightness = brightnessPercent;
}

void getAdcValue(void)
{
    uint32_t adcValue = ADC_Measure();
    GenericHidOutBuffer[0] = adcValue >> 0;
    GenericHidOutBuffer[1] = adcValue >> 8;
    GenericHidOutBuffer[2] = adcValue >> 16;
    GenericHidOutBuffer[3] = adcValue >> 24;
}

void launchEepromTransfer(void)
{
    eeprom_transfer_t transferType = GenericHidInBuffer[1];
    EEPROM_LaunchTransfer(transferType);
}

// The main protocol handler function

void usbProtocolHandler(void)
{
    bzero(GenericHidOutBuffer, USB_GENERIC_HID_OUT_BUFFER_LENGTH);
    uint8_t command = GenericHidInBuffer[0];
    switch (command) {
        case UsbCommand_GetSystemProperty:
            getSystemProperty();
            break;
        case UsbCommand_Reenumerate:
            reenumerate();
            break;
        case UsbCommand_SetTestLed:
            setTestLed();
            break;
        case UsbCommand_WriteLedDriver:
            break;
        case UsbCommand_WriteEeprom:
            writeEeprom();
            break;
        case UsbCommand_ReadEeprom:
            readEeprom();
            break;
        case UsbCommand_ReadMergeSensor:
            readMergeSensor();
            break;
        case UsbCommand_UploadConfig:
            uploadConfig();
            break;
        case UsbCommand_ApplyConfig:
            applyConfig();
            break;
        case UsbCommand_SetLedPwm:
            setLedPwm();
            break;
        case UsbCommand_GetAdcValue:
            getAdcValue();
            break;
        case UsbCommand_LaunchEepromTransfer:
            launchEepromTransfer();
            break;
        default:
            break;
    }
}