# Ultimate Hacking Keyboard firmware

This repository hosts the firmware of the [Ultimate Hacking Keyboard](https://ultimatehackingkeyboard.com/).

## Cloning the repository

Please make sure to clone this repo with:

`git clone --recursive git@github.com:UltimateHackingKeyboard/firmware.git`

This will download the dependent submodules, which are required to build the firmware.

## Importing the firmware

Install [Kinetis Design Studio](http://www.nxp.com/products/software-and-tools/run-time-software/kinetis-software-and-tools/ides-for-kinetis-mcus/kinetis-design-studio-integrated-development-environment-ide:KDS_IDE) (KDS), import the project by invoking *File -> Import -> General -> Existing Projects into Workspace*, select the *left* or *right* directory depending on the desired firmware, then click on the *Finish* button.

## Building and flashing the firmware

*Please substitute vX with the actual version of your prototype (v6, v7, etc.) below.*

For the left keyboard half, make sure to power it via the right keyboard half (which must be powered via USB). Also connect the left keyboard half to your SEGGER J-Link USB debug probe (which must also be connected via USB). Then in KDS, click on *Run -> Run Configurations*, select *GDB SEGGER J-Link Debugging -> uhk-left vX release jlink*, and click on the *Debug* button.

For the right keyboard half, flash [the bootloader](https://github.com/UltimateHackingKeyboard/bootloader) first. Then in KDS, click on *Run -> Run Configurations*, select *C/C++ Application -> uhk-right vX release kboot*, and click on the *Debug* button.

## Contributing

Want to contribute? Let us show you [how](/CONTRIBUTING.md).