From e97ce514d7dbc0fe7c13dd0b4f44e721401b5184 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?L=C3=A1szl=C3=B3=20Monda?= Date: Sun, 19 Feb 2017 16:15:42 +0100 Subject: [PATCH] Update README.md --- README.md | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/README.md b/README.md index 5e6da7d..d06828c 100644 --- a/README.md +++ b/README.md @@ -12,19 +12,19 @@ This will download the dependent submodules which are required to build the firm ## Bootloader dependency -Before flashing the firmware of the right keyboard half, [the bootloader](https://github.com/UltimateHackingKeyboard/bootloader) must be flashed to the microcontroller, otherwise the firmware will not be started. The reason is that the bootloader executes first, then it jumps to the firmware. +Before flashing the firmware of the right keyboard half, [the bootloader](https://github.com/UltimateHackingKeyboard/bootloader) must be flashed to the microcontroller, otherwise the firmware will not be started. The reason is that the bootloader gets executed first, then it jumps to the firmware, which is offsetted. ## Importing the firmware -Install [Kinetis Design Studio](http://www.nxp.com/products/software-and-tools/run-time-software/kinetis-software-and-tools/ides-for-kinetis-mcus/kinetis-design-studio-integrated-development-environment-ide:KDS_IDE) (KDS) and import the project by invoking **File -> Import -> General -> Existing Projects** into Workspace, select the `right` or `left` directory depending on the firmware to be built, then click on the Finish button. At this point, you should be able to build the firmware in KDS. +Install [Kinetis Design Studio](http://www.nxp.com/products/software-and-tools/run-time-software/kinetis-software-and-tools/ides-for-kinetis-mcus/kinetis-design-studio-integrated-development-environment-ide:KDS_IDE) (KDS) and import the project by invoking *File -> Import -> General -> Existing Projects* into Workspace, select the `right` or `left` directory depending on the desired firmware, then click on the Finish button. At this point, you should be able to build the firmware in KDS. ## Building and flashing the firmware In KDS, click on Run > Debug Configurations, then you have two choices: -1. You can select **C/C++ Application > uhk-right v7 release kboot** to flash the firmware via the bootloader. +1. You can select *C/C++ Application > uhk-right v7 release kboot* to flash the firmware via the bootloader. -2. You can select **GDB SEGGER J-Link Debugging > uhk-right v7 release jlink** to flash the firmware via a SEGGER J-Link USB debug probe. In this case, the target device (left or right keyboard half, or add-on module) must be powered, and it must be connected to the debug probe. +2. You can select *GDB SEGGER J-Link Debugging > uhk-right v7 release jlink* to flash the firmware via a SEGGER J-Link USB debug probe. In this case, the target device (left or right keyboard half, or add-on module) must be powered, and it must be connected to the debug probe. ## Contributing