uhk/firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Remove LED jumper and ISO jumper related code, as the presence of LEDs and ISO/ANSI configuration will be stored in the hardware configuration area of the EEPROM instead of using solder jumpers.

Browse Source
This commit is contained in:
László Monda
2017-01-05 19:25:39 +01:00
parent a817118eb3
commit ce1b16f406
12 changed files with 1 additions and 113 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
left/build/kds/.gitignore vendored
View File

@@ -1,3 +1,4 @@
/debug/
/release/
/v7-release/
/v6-release/

4
left/src/bridge_protocol_handler.c
View File

@@ -3,7 +3,6 @@
#include "main.h"
#include "i2c_addresses.h"
#include "i2c.h"
#include "iso_jumper.h"
void SetError(uint8_t error);
void SetGenericError();
@@ -37,8 +36,5 @@ void BridgeProtocolHandler()
BridgeTxSize = 0;
TEST_LED_SET(BridgeRxBuffer[1]);
break;
case BRIDGE_COMMAND_GET_ISO_JUMPER_STATE:
BridgeTxBuffer[0] = IsoJumperState;
break;
}
}

1
left/src/bridge_protocol_handler.h
View File

@@ -15,7 +15,6 @@
#define BRIDGE_COMMAND_GET_KEY_STATES 0
#define BRIDGE_COMMAND_SET_LED 1
#define BRIDGE_COMMAND_GET_ISO_JUMPER_STATE 2
// Variables:

2
left/src/init_peripherials.c
View File

@@ -6,7 +6,6 @@
#include "fsl_i2c.h"
#include "fsl_clock.h"
#include "i2c.h"
#include "iso_jumper.h"
void InitI2c() {
port_pin_config_t pinConfig = {
@@ -42,6 +41,5 @@ void InitPeripherials(void)
{
InitLedDriver();
InitTestLed();
InitIsoJumper();
InitI2c();
}

14
left/src/iso_jumper.c
View File

@@ -1,14 +0,0 @@
#include "iso_jumper.h"
#include "fsl_port.h"
void InitIsoJumper() {
CLOCK_EnableClock(ISO_JUMPER_INPUT_CLOCK);
PORT_SetPinConfig(ISO_JUMPER_INPUT_PORT, ISO_JUMPER_INPUT_PIN,
&(port_pin_config_t){.pullSelect=kPORT_PullDown, .mux=kPORT_MuxAsGpio});
GPIO_PinInit(ISO_JUMPER_INPUT_GPIO, ISO_JUMPER_INPUT_PIN, &(gpio_pin_config_t){kGPIO_DigitalInput});
CLOCK_EnableClock(ISO_JUMPER_OUTPUT_CLOCK);
PORT_SetPinConfig(ISO_JUMPER_OUTPUT_PORT, ISO_JUMPER_OUTPUT_PIN,
&(port_pin_config_t){.pullSelect=kPORT_PullDisable, .mux=kPORT_MuxAsGpio});
GPIO_PinInit(ISO_JUMPER_OUTPUT_GPIO, ISO_JUMPER_OUTPUT_PIN, &(gpio_pin_config_t){kGPIO_DigitalOutput, 1});
}

30
left/src/iso_jumper.h
View File

@@ -1,30 +0,0 @@
#ifndef __ISO_JUMPER_H__
#define __ISO_JUMPER_H__
// Includes:
#include "fsl_gpio.h"
// Macros:
#define ISO_JUMPER_INPUT_GPIO GPIOB
#define ISO_JUMPER_INPUT_PORT PORTB
#define ISO_JUMPER_INPUT_CLOCK kCLOCK_PortB
#define ISO_JUMPER_INPUT_PIN 13
#define ISO_JUMPER_INPUT_IRQ PORTB_IRQn
#define ISO_JUMPER_INPUT_IRQ_HANDLER PORTB_IRQHandler
#define ISO_JUMPER_OUTPUT_GPIO GPIOA
#define ISO_JUMPER_OUTPUT_PORT PORTA
#define ISO_JUMPER_OUTPUT_CLOCK kCLOCK_PortA
#define ISO_JUMPER_OUTPUT_PIN 6
#define ISO_JUMPER_OUTPUT_IRQ PORTA_IRQn
#define ISO_JUMPER_OUTPUT_IRQ_HANDLER PORTA_IRQHandler
#define ISO_JUMPER_IS_ENABLED !GPIO_ReadPinInput(ISO_JUMPER_INPUT_GPIO, ISO_JUMPER_INPUT_PIN)
// Functions:
extern void InitIsoJumper();
#endif

2
left/src/main.c
View File

@@ -9,7 +9,6 @@
#include "i2c.h"
#include "init_peripherials.h"
#include "bridge_protocol_handler.h"
#include "iso_jumper.h"
key_matrix_t keyMatrix = {
.colNum = KEYBOARD_MATRIX_COLS_NUM,
@@ -84,7 +83,6 @@ int main(void)
{
InitClock();
InitPeripherials();
IsoJumperState = ISO_JUMPER_IS_ENABLED;
I2C_SlaveGetDefaultConfig(&slaveConfig);
slaveConfig.slaveAddress = I2C_ADDRESS_LEFT_KEYBOARD_HALF;

2
right/src/init_peripherials.c
View File

@@ -5,7 +5,6 @@
#include "i2c.h"
#include "led_driver.h"
#include "merge_sensor.h"
#include "led_jumper.h"
void InitI2c() {
port_pin_config_t pinConfig = {
@@ -47,7 +46,6 @@ void InitI2c() {
void InitPeripherials(void)
{
InitResetButton();
InitLedJumper();
InitMergeSensor();
InitTestLed();
InitI2c();

8
right/src/led_jumper.c
View File

@@ -1,8 +0,0 @@
#include "led_jumper.h"
#include "fsl_port.h"
void InitLedJumper() {
CLOCK_EnableClock(LED_JUMPER_CLOCK);
PORT_SetPinConfig(LED_JUMPER_PORT, LED_JUMPER_PIN,
&(port_pin_config_t){.pullSelect=kPORT_PullUp, .mux=kPORT_MuxAsGpio});
}

23
right/src/led_jumper.h
View File

@@ -1,23 +0,0 @@
#ifndef __LED_JUMPER_H__
#define __LED_JUMPER_H__
// Includes:
#include "fsl_gpio.h"
// Macros:
#define LED_JUMPER_GPIO GPIOC
#define LED_JUMPER_PORT PORTC
#define LED_JUMPER_CLOCK kCLOCK_PortC
#define LED_JUMPER_PIN 4
#define LED_JUMPER_IRQ PORTC_IRQn
#define LED_JUMPER_IRQ_HANDLER PORTC_IRQHandler
#define LED_JUMPER_IS_ENABLED !GPIO_ReadPinInput(LED_JUMPER_GPIO, LED_JUMPER_PIN)
// Functions:
extern void InitLedJumper();
#endif

25
right/src/usb_protocol_handler.c
View File

@@ -4,7 +4,6 @@
#include "i2c_addresses.h"
#include "led_driver.h"
#include "merge_sensor.h"
#include "led_jumper.h"
void SetError(uint8_t error);
void SetGenericError();
@@ -17,8 +16,6 @@ void ReadLedDriver();
void WriteEeprom();
void ReadEeprom();
void ReadMergeSensor();
void ReadLedJumper();
void ReadIsoJumper();
// Functions for setting error statuses
@@ -68,12 +65,6 @@ void UsbProtocolHandler()
case USB_COMMAND_READ_MERGE_SENSOR:
ReadMergeSensor();
break;
case USB_COMMAND_READ_LED_JUMPER:
ReadLedJumper();
break;
case USB_COMMAND_READ_ISO_JUMPER:
ReadIsoJumper();
break;
default:
break;
}
@@ -180,19 +171,3 @@ void ReadMergeSensor()
{
SetResponseByte(MERGE_SENSOR_IS_MERGED);
}
void ReadLedJumper()
{
SetResponseByte(LED_JUMPER_IS_ENABLED);
}
void ReadIsoJumper()
{
uint8_t txBuffer[] = {2};
I2cWrite(I2C_MAIN_BUS_BASEADDR, I2C_ADDRESS_LEFT_KEYBOARD_HALF, txBuffer, sizeof(txBuffer));
uint8_t rxBuffer[1];
I2cRead(I2C_MAIN_BUS_BASEADDR, I2C_ADDRESS_LEFT_KEYBOARD_HALF, rxBuffer, sizeof(rxBuffer));
SetResponseByte(rxBuffer[0]);
}

2
right/src/usb_protocol_handler.h
View File

@@ -25,8 +25,6 @@
#define WRITE_EEPROM_RESPONSE_INVALID_PAYLOAD_SIZE 1
#define USB_COMMAND_READ_EEPROM 6
#define USB_COMMAND_READ_MERGE_SENSOR 7
#define USB_COMMAND_READ_LED_JUMPER 8
#define USB_COMMAND_READ_ISO_JUMPER 9
// Functions: