uhk/firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Remove dead code.

Browse Source
This commit is contained in:
László Monda
2016-10-18 21:46:04 +02:00
parent 5a32ff743c
commit 1286d9cfc3
1 changed files with 0 additions and 86 deletions
Download Patch File Download Diff File Expand all files Collapse all files

86
left/src/main.c
View File

@@ -34,7 +34,6 @@ key_matrix_t keyMatrix = {
i2c_slave_config_t slaveConfig; i2c_slave_config_t slaveConfig;
i2c_slave_handle_t slaveHandle; i2c_slave_handle_t slaveHandle;
volatile bool g_SlaveCompletionFlag = false;
static void i2c_slave_callback(I2C_Type *base, i2c_slave_transfer_t *xfer, void *userData) static void i2c_slave_callback(I2C_Type *base, i2c_slave_transfer_t *xfer, void *userData)
{ {
@@ -47,12 +46,10 @@ static void i2c_slave_callback(I2C_Type *base, i2c_slave_transfer_t *xfer, void
case kI2C_SlaveReceiveEvent: case kI2C_SlaveReceiveEvent:
break; break;
case kI2C_SlaveCompletionEvent: case kI2C_SlaveCompletionEvent:
g_SlaveCompletionFlag = true;
break; break;
case kI2C_SlaveTransmitAckEvent: case kI2C_SlaveTransmitAckEvent:
break; break;
default: default:
g_SlaveCompletionFlag = true;
break; break;
} }
} }
@@ -69,91 +66,8 @@ int main(void)
I2C_SlaveTransferCreateHandle(I2C_BUS_BASEADDR, &slaveHandle, i2c_slave_callback, NULL); I2C_SlaveTransferCreateHandle(I2C_BUS_BASEADDR, &slaveHandle, i2c_slave_callback, NULL);
I2C_SlaveTransferNonBlocking(I2C_BUS_BASEADDR, &slaveHandle, kI2C_SlaveCompletionEvent); I2C_SlaveTransferNonBlocking(I2C_BUS_BASEADDR, &slaveHandle, kI2C_SlaveCompletionEvent);
// while (!g_SlaveCompletionFlag) {}
// g_SlaveCompletionFlag = false;
KeyMatrix_Init(&keyMatrix); KeyMatrix_Init(&keyMatrix);
while (1) { while (1) {
KeyMatrix_Scan(&keyMatrix); KeyMatrix_Scan(&keyMatrix);
} }
while (1)
{
for (uint32_t i=0; i<500000; i++) {
TEST_LED_ON();
} }
for (uint32_t i=0; i<500000; i++) {
TEST_LED_OFF();
}
}
}
/*
// Initialize GPIO.
gpio_input_pin_user_config_t inputPin[] =
{
{
.pinName = kGpioSW2,
.config.isPullEnable = true,
.config.pullSelect = kPortPullUp,
.config.isPassiveFilterEnabled = false,
.config.interrupt = kPortIntDisabled,
},
{
.pinName = kGpioSW3,
.config.isPullEnable = true,
.config.pullSelect = kPortPullUp,
.config.isPassiveFilterEnabled = false,
.config.interrupt = kPortIntDisabled,
},
{
.pinName = GPIO_PINS_OUT_OF_RANGE,
}
};
gpio_output_pin_user_config_t outputPin[] =
{
{
.pinName = kGpioLED1,
.config.outputLogic = 0,
.config.slewRate = kPortFastSlewRate,
.config.driveStrength = kPortHighDriveStrength,
},
{
.pinName = kGpioLED3,
.config.outputLogic = 0,
.config.slewRate = kPortFastSlewRate,
.config.driveStrength = kPortHighDriveStrength,
},
{
.pinName = GPIO_PINS_OUT_OF_RANGE,
}
};
GPIO_DRV_Init(inputPin, outputPin);
// Initialize I2C.
i2c_slave_state_t slave;
i2c_slave_user_config_t userConfig = {
.address = I2C_ADDRESS_LED_DRIVER_LEFT,
.slaveCallback = i2c_slave_callback,
.callbackParam = NULL,
.slaveListening = true,
.startStopDetect = true,
};
configure_i2c_pins(0);
I2C_DRV_SlaveInit(BOARD_I2C_INSTANCE, &userConfig, &slave);
// Update switch states and toggle LEDs accordingly.
while (1) {
isSw2Pressed = GPIO_DRV_ReadPinInput(kGpioSW2);
isSw3Pressed = GPIO_DRV_ReadPinInput(kGpioSW3);
GPIO_DRV_WritePinOutput(kGpioLED1, isSw2Pressed);
GPIO_DRV_WritePinOutput(kGpioLED3, isSw3Pressed);
}
*/