Overview
========
The MCG_Lite example shows how to use MCG_Lite driver:
1. How to use the mode functions for MCG_Lite mode switch.
2. How to use the frequency functions to get current MCG_Lite frequency.
3. Work flow
Reset mode --> LIRC8M
LIRC8M --> HIRC
HIRC --> LIRC2M
LIRC2M --> EXT
EXT --> HIRC
HIRC --> LIRC8M
LIRC8M --> EXT
EXT --> LIRC2M
LIRC2M --> HIRC
HIRC --> EXT
EXT --> LIRC8M
LIRC8M --> LIRC2M
LIRC2M --> LIRC8M
In this example, because the debug console's clock frequency may change,
so the example running information is not output from debug console. Here the
LED blinks to show that the example finished successfully.
Toolchain supported
===================
- IAR embedded Workbench 7.60.1
- Keil MDK 5.18a
- GCC ARM Embedded 2015-4.9-q3
- Kinetis Development Studio IDE 3.2.0
- Atollic TrueSTUDIO 5.4.2
Hardware requirements
=====================
- Mini/micro USB cable
- FRDMKL03Z board
- Personal Computer
Board settings
==============
No special board settings.
Prepare the Demo
================
1. Connect a mini/micro USB cable between the PC host and the OpenSDA USB port on FRDMKL03Z board.
2. Download the program to the target board.
3. Either press the reset button on your board or launch the debugger in your IDE to begin running
the demo. For detailed instructions, see Getting Started with Software Development Kit for
KL03Z.
Running the demo
================
When the demo runs successfully, the board's LED will blink.
Customization options
=====================
